Industrial Control Products

WAGO 2002-1211/1000-410 diode terminal block, rail mount, 2-conductor. Perfect for industrial automation.

Control single-coil valves with the WAGO 750-1632/000-100 Proportional Valve Module. Features 2-channel operation, H-bridge outputs, and PWM control.

KNX IP Controller for IP backbone routing, compatible with KNX/EIB/TP1 Module.

WAGO 897-122 flat cable, 2 x 1.5 mm², halogen-free, 2 buses, 50 V, light gray. Ideal for reliable connections.

WAGO pre-assembled 2-pole connecting cable, 5m long, gray, coding F, 0.8mm conductor diameter.

WAGO 734-554 THT female header: angled, 24-pole, 3.5 mm pin spacing, 100% protected against mismating.

10-pole THT female header with 3.5mm pin spacing, locking lever, and 100% protection against mismating.

The WAGO 788-508 is a relay module designed for industrial applications, featuring a nominal input voltage of 230 VAC, one changeover contact, and a limiting continuous current of 16 A. It includes a red status indicator and has a module width of 15 mm.

Yellow cable tie marker, 100 x 15mm, for use with cable ties and compatible with WAGO Smart Printer.

WAGO 713-1422/117-000 THR male header, 2-row, angled, with 0.8 x 0.8 mm solder pins and threaded flange.

MODBUS RTU Fieldbus Coupler with RS-485 interface, 24V power supply, and programmable PLC functions.

Yellow conductor markers for thread-on mounting, compatible with WAGO Smart Printer, 5 x 10.5 mm.

WAGO 787-3861/000-3000: 2-potential distribution module with 4 clamping points each (0V/24V), up to 2.5mm² conductor cross-section.

WAGO 247-530 Mini-WSB marking card, white, pre-printed with numbers for easy cable identification.

Fuse plug with pull-tab for miniature metric fuse 1/4 x 1 1/4. 10.4 mm wide, gray, without blown fuse indication.

2-conductor terminal block with 1N4007 diode, for DIN-rail 35 x 15 and 35 x 7.5, using CAGE CLAMP® technology.

TOPJOB®S 3-conductor terminal block with push-buttons for easy disconnect and testing. Mounts on DIN rail.

Stackable PCB terminal block with 1.5 mm² conductor size, 5/5.08 mm pin spacing, and Push-in CAGE CLAMP® connection.

21-position terminal block plug with female sockets, 2.5 mm² wire size, and 5.08 mm pin spacing. CAGE CLAMP® system.

Gray snap-fit end plate for PCB interconnect. 1 mm thick, made by WAGO. Part of Series 257.