Industrial Control Products

1-conductor male connector with push-in CAGE CLAMP, 10 mm², 7.62 mm pin spacing, 9-pole, threaded flange, and 100% protected against mismating.

WAGO 750-630/000-008 SSI transmitter interface for industrial automation, 25 bits, 125 kHz, Gray code.

WAGO 2092-3505/002-000 male connector with 5 poles, 2.5 mm² wire size, and 7.5 mm pin spacing. Light gray, push-in CAGE CLAMP technology.

Single-channel electronic circuit breaker for 24VDC systems, providing reliable overload and short circuit protection.

The WAGO 753-509 is a 2-channel digital output module designed for industrial automation applications, featuring 230 VAC and 0.3 A solid-state outputs.

10-pole female plug with integrated end plate, 5mm pin spacing, CAGE CLAMP® technology, and rated for 16A, 320V.

Sensor/Actuator cable for industrial applications, featuring an M8 angled socket and an M12A straight plug, with 3 poles and a length of 2 meters.

Pre-assembled 2-pole interconnecting cable, Cod. E, 7m long, green, with copper alloy contacts.

WAGO 232-236/047-000 is a 6-pole THT female header with a 5mm pitch, right angle orientation, and solder termination.

5-pole PCB terminal block with 2.5 mm² wire cross section, 5/5.08 mm pin spacing, and CAGE CLAMP® technology.

The WAGO 216-151 ferrule is designed for 0.25 mm² / AWG 24 wires. It is uninsulated and electro-tin plated, ensuring reliable connections.

Sensor/Actuator cable for connecting sensors and actuators, featuring an M8 angled socket and an M12A straight plug, with 3 poles and a length of 1.5 meters.

Versatile rail-mount terminal blocks for industrial and building installations.

WAGO 2-conductor female connector with Push-in CAGE CLAMP, 2.5 mm², 5.08 mm pin spacing, and 10 poles.

2-conductor female connector with CAGE CLAMP®, 2.5 mm², 5.08 mm pin spacing, and lateral locking levers.

WAGO 2-Conductor Female Connector with push-in CAGE CLAMP technology, suitable for 2.5 mm² conductors and 5.08 mm pin spacing.

The WAGO 231-2306/037-000 is a 2-conductor female connector featuring CAGE CLAMP technology, 5.08 mm pin spacing, and lateral locking levers.

WAGO 862-9515 is a 4-conductor chassis-mount terminal strip with PE-N-L1-L2-L3 configuration, suitable for various electrical applications.

The WAGO 2000-1206 is a 2-conductor through terminal block, suitable for Ex e II applications, with push-in CAGE CLAMP connection technology.

WAGO 793-502/000-023 marking card for terminal blocks, with thermal transfer marking and snap-on type, marked 1-10.