Industrial Control Products

1-conductor female connector with push-in CAGE CLAMP®, 10 mm², 7.62 mm pin spacing, and 100% protection against mismating.

WAGO 209-660 WSB marking card for vertical marking. Snap-on type, white, marked with numbers 510-600.

Stackable PCB terminal block with 45° angle, 5mm pitch, and 24A current rating. Ideal for PCB mounting.

8-way junction box connector for AWG 22-18 solid wires, 6A rated, push-in termination.

The WAGO 750-651 is a serial TTY interface with 9600 baud, 8/1 bits configuration, and is ROHS compliant.

WAGO SMD PCB terminal block with PUSH WIRE technology, suitable for AWG 26-22 wires, 3mm pin spacing, and 1-pole configuration.

WAGO 232-568/007-000 is an 8-pole double pin header with 7.5mm pitch, designed for DIN-35 rail mounting.

WAGO 209-416 WSB marking card for horizontal marking on 5mm terminal blocks. Snap-on type, white, and non-stretchable.

WAGO 2092-1502/002-000 1-conductor male connector with push-in CAGE CLAMP, 2.5 mm² conductor size, and 5 mm pin spacing.

Marker card for labeling, DIN A4 sheet, plain white, suitable for various marking needs.

WAGO 721-203/037-000 is a 1-conductor female connector with CAGE CLAMP technology, 2.5 mm² conductor cross-section, and 7.5 mm pin spacing.

Angled THT female header with 12 poles, 5.08 mm pin spacing, and clamping collar. Ideal for wire-to-wire and board-to-wire connections.

The WAGO 727-155 is an 8-level end plate designed for 864, featuring clear marking and a thickness of 7.62 mm.

Male connector for rail-mount terminal blocks with 7 poles, 5mm pin spacing, and CAGE CLAMP technology.

2-conductor through terminal block with POWER CAGE CLAMP technology, suitable for DIN 35 x 15 rail.

WAGO 232-281 THT female header with 0.6 x 1.0 mm solder pin, angled. Suitable for push-in CAGE CLAMP and PUSH-WIRE termination.

Self-adhesive marking strips by WAGO. Pre-printed with numbers 1-16, DIN A4 sheet, 3mm height, 182mm length.

WAGO 721-165/001-040 THT male header for PCB mounting. Features 5 poles, straight 1.2x1.2mm pins, and preceding ground contact. Supports up to 16A current.

Double-deck terminal block for DIN-rail, 2.5 mm² wire cross-section, CAGE CLAMP® technology, gray color.

The WAGO 243-804 is a 4-way MICRO PUSH WIRE connector designed for use in junction boxes, accommodating AWG 22-18 solid wires.