Wago

Terminal block with varistor and end plate, direct DIN rail connection, 48 VDC, 0.08-2.5 mm² wire gauge range.

Double-deck terminal block with varistor and end plate, compatible with DIN-rail 35 x 15 and 35 x 7.5, using CAGE CLAMP®.

Terminal block with suppressor diode for 48 VDC, direct DIN rail mounting, and ROHS compliant.

Double-deck terminal block with BZW06-B TVS diode for overvoltage protection, compatible with DIN-rail 35 x 15 and 35 x 7.5.

Double-deck terminal block with P6KE91C TVS diode for 60 VDC overvoltage protection, compatible with DIN rail 35 x 15 and 35 x 7.5.

The WAGO 792-801 is a two-stage surge suppression module for 24 VDC signal technology, protecting two signal paths with a common surge arrester.

Double-deck terminal block with varistor and end plate, CAGE CLAMP connections, for DIN-35 rail, 24VDC, 20A.

WAGO 792-803 is a two-stage surge suppression module for signal technology, designed for 24 VDC and symmetric interfaces.

Terminal block with varistor for DIN rail mounting, providing overvoltage protection.

Double-deck terminal block with varistor, end plate, and direct DIN-rail connection for surge protection.

Double-deck terminal block with varistor and end plate for DIN rail, 2.5 mm², CAGE CLAMP technology.

The WAGO 792-802 is a surge protection terminal block designed to safeguard electrical systems against voltage surges.

WAGO 859-409 push-in type jumper bar, 9-way, insulated, 18 A nominal current. Ideal for terminal blocks.

Terminal block with varistor and end plate; 115 VAC.

Double-deck terminal block with built-in MOV varistor, 1 feed-through pole, 4 wires, 48Vdc, 20A, gray, CAGE CLAMP connections, DIN-35 rail mount.

Terminal block with suppressor diode and end plate; 115 VAC; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm²; CAGE CLAMP®.

WAGO's 870-523/281-592 terminal block is designed for DIN-rail mounting, featuring a suppressor diode for enhanced voltage protection and reliable connections.

Double-deck component terminal block with end plate and 1.5KE33C TVS diode, designed for DIN-rail mounting.

Double-deck component terminal block with varistor for DIN-rail 35 x 15 and 35 x 7.5, 2.5 mm², CAGE CLAMP®.

The WAGO 859-500 test pin is designed for soldering test wires up to 0.5mm². It features a 1 mm Ø diameter and supports 30 V AC / 60 V DC with a current rating of 1 A.