Industrial Control Products

WAGO 280-902/056-000 is a spacer of the same profile, designed for 2-conductor terminal blocks of horizontal type.

End and intermediate plate for 3-conductor terminal blocks. 1 mm thick, gray, and made from insulating material.

Empty housing for M8 terminal blocks. Suitable for DIN-rail mounting. Dimensions: 22.8mm x 67mm x 26.5mm.

The WAGO 280-614 is a 4-conductor disconnect terminal block, 5 mm wide, blue, designed for DIN-rail mounting.

1-conductor female connector with CAGE CLAMP technology, 2.5 mm², 5.08 mm pin spacing, and 9 poles.

Stackable PCB terminal block with angled push-button, suitable for 2.5 mm² conductors, featuring CAGE CLAMP® technology and commoning option.

WAGO 257-407 PCB terminal block, push-button, 2.5 mm², 7-pole, CAGE CLAMP®.

Mini-WSB marking card for labeling, marked 1-9, horizontal marking, snap-on type, white.

Angled THT male header with 5 poles, 3.5 mm pin spacing, and 0.8 x 0.8 mm solder pins.

WAGO 713-1111/107-9037 is a 1-conductor female connector, 2-row, with CAGE CLAMP®, 1.5 mm² wire cross section, and 3.5 mm pin spacing.

3-pole THR PCB terminal block with push-in CAGE CLAMP®, 1.5 mm² conductor cross section, and 5 mm pin spacing.

WAGO 750-975 RJ-45 connector, IP20 rated, for 10/100 Mbit/s Ethernet connections.

WAGO 745-653/006-000 PCB terminal block with 3 poles, 16 mm² wire cross section, and CAGE CLAMP technology.

Fieldbus connector with D-sub male connector, 9-pole, and two horizontal cable entries for PROFIBUS devices.

WAGO 231-120/125-000 electrical connector, part of the 231 series, offering reliable connections for industrial use.

WAGO 734-318/109-000 male connector, 1.5 mm², 3.5 mm pin spacing, 18-pole, threaded flange, 100% protected against mismating.

The WAGO 231-132/040-000 is a 2-pole THT male header designed for PCBs, featuring 1.0 x 1.0 mm solder pins, straight orientation, and a mounting flange.

22-pole female connector with 5mm pin spacing, suitable for 0.08-2.5mm² conductors. RoHS compliant and UL approved.

WAGO 283-353 is a 2mm thick, oversized orange separator plate for DIN rail terminal blocks.

Stackable PCB terminal block with 2.5 mm² wire cross section and 5/5.08 mm pin spacing.