Industrial Control Products

The WAGO 727-105 is an 8-level end plate with marking 0-1-2-3-4-5-6-7--7-6-5-4-3-2-1, made of polyamide, and is 7.62 mm thick.

Insulated ferrule for 4 mm² / AWG 12 wires, made from electrolytic copper, electro-tin plated, and gastight crimped.

Step-down cover plate, 1 mm thick, compatible with 2-conductor 282-901 terminal blocks, orange.

The TOPJOB S spacer module (2001-549) is a 4.2 mm wide, gray module for use with 2001-511 in 864.

WAGO 264-367 separator for Ex e/Ex i applications. 4 mm thick, 66 mm wide, orange, made of Polyamide (PA66).

Strain relief housing for female and male connectors, 12-pole, 5.08 mm pin spacing, orange.

Compact 2-conductor terminal block for DIN-rail mounting, ideal for Ex i applications with test option and center marking.

4-conductor terminal block with pivoting knife disconnect and test port for DIN-rail mounting.

WAGO 2022-105/000-016: 1-conductor female connector with Push-in CAGE CLAMP®, 4 mm², 5.2 mm pin spacing.

WAGO 832-3622 THT male header, 1.2 x 1.2 mm solder pins, angled, 2-pole, 10.16 mm spacing, 100% protected against mismating.

1-conductor female connector with lever, push-in CAGE CLAMP, 16 mm² wire size, and 100% protection against mismating.

Advanced Line 10.1-inch touch panel by WAGO, featuring 1280x800 resolution, IP65 rating, and various connectivity options.

2-channel analog output module with 4–20 mA signals, 12-bit resolution, and electrical isolation.

2-conductor, 2-pin terminal block with push-in CAGE CLAMP for DIN-rail mounting.

WAGO 2092-3522/020-000 is a 1-conductor male connector with Push-in CAGE CLAMP technology, ideal for DIN-35 rail/panel mounting.

WAGO 832-3623 THT male header, 3-pole, 10.16 mm pitch, right-angled solder pins. Suitable for PCB interconnects.

4-conductor chassis-mount terminal strip by WAGO, featuring push-in termination and copper conductors.

8-level terminal block for matrix patching, suitable for 35 x 15 mm mounting rail, with 1.5 mm² cross-section and locking clips.

WAGO 255-811 spacer for doubling pin spacing, compatible with WAGO connectors.

WAGO 282-604 2-conductor through terminal block for DIN-rail, suitable for Ex i applications with CAGE CLAMP® technology.