Industrial Control Products

WSB marking card for vertical marking. Snap-on type, green, and non-stretchable. Marks 1-50 (2x).

WAGO 769-431 locking lever for securing female connectors, 5 mm pin spacing, 2 poles, orange.

The WAGO 753-556 is a 2-channel analog output module with ±10 VDC output range, suitable for industrial automation and control systems.

20-pole connection cable with pluggable connector per DIN 41651, open-ended, 2m long, and 0.14mm² conductor cross-section.

A 12-pole, 2-conductor terminal strip with CAGE CLAMP® connection technology, suitable for screw or similar mounting types.

WSB marking card for terminal blocks, numbers 160-200, vertical marking, white color.

3-conductor terminal block for PNP high-side switching actuators, featuring ground contact and push-in CAGE CLAMP connections.

WAGO 2091-1525/020-3000: 1-conductor male connector with push-in CAGE CLAMP, 10 A rated current, and DIN-35 rail mounting.

Angled THT male header with 2 poles, 7.5 mm pin spacing, and 1.0 x 1.0 mm solder pins.

9-pole, 1-conductor female connector with 2.5 mm² conductor size and 7.5 mm pin spacing.

9-pole THT male header with 1.0 x 1.0 mm solder pins, straight orientation, and 5.08 mm pin spacing.

IP65 enclosure made from sheet steel (RAL 7035), dimensions 400x120x200 mm, ideal for industrial applications.

WAGO 231-263/001-000 male header, a 3-pole THT connector with 1.2 x 1.2 mm solder pins, straight orientation, and 7.5 mm pin spacing.

Self-adhesive marking strips for WAGO 260 series terminal blocks. White, 6mm x 182mm, marked 11-20.

3-conductor terminal block for PNP high-side sensors, featuring a yellow LED and pluggable signal level.

Thermal transfer ink ribbon for WAGO label printers TP 298 and TP 343, designed for use with polyester labels.

WSB marking card for labeling, marked with numbers 1-100, snap-on type, white color.

9-pole THT male header connector, 7.5 mm pin spacing, 600 V, 10 A. Suitable for PCB mounting with coding fingers and anti-rotation protection.

Pre-assembled connecting cable with Cca plug and open end, suitable for industrial automation applications.

WAGO 210-704 labels for TP printers with permanent adhesive and 70 x 100 mm marking surface.