Industrial Control Products

9-pole PCB terminal block with 2.5 mm² conductor cross-section, 7.62 mm pin spacing, and CAGE CLAMP® connection technology.

WAGO 231-318/008-000 female connector, 18-pole, 2.5 mm², CAGE CLAMP®, snap-in mounting.

WAGO 218-114 PCB terminal block with locking slides, 14 poles, 0.5 mm² wire size, and 2.5 mm pin spacing.

Accurate current measurement up to 4 kA and 344 kHz. 70 mm diameter, 4.5 m length, wire leads termination.

The WAGO 233-508 is an 8-pole PCB terminal block with a 0.5 mm² wire size and 2.54 mm pin spacing, featuring a push-button and CAGE CLAMP® technology.

Quadruple-deck rail-mounted terminal block for electric motor wiring, 2.5 mm², L1-L3-PE, DIN-rail 35 x 15 and 35 x 7.5.

The WAGO 252-904 is a THT pin strip with 4 poles, 3.5 mm pin spacing, and 1 mm solder pin diameter.

JUMPFLEX signal conditioner, isolation amplifier, 4-20mA input, 0-10V output, 24VDC supply, compact 6mm module width.

3-pole PCB terminal block with push-in CAGE CLAMP, 0.5 mm² wire, 5 A, 300 V, 45° angle.

1-conductor male connector with CAGE CLAMP, 1.5 mm², 3.5 mm pin spacing, 100% protected against mismating.

WAGO 231-314/102-000 is a 1-conductor female connector featuring CAGE CLAMP® technology, designed for 2.5 mm² conductors with 5.08 mm pin spacing.

Universal 1-conductor female connector with CAGE CLAMP technology for easy wiring and pre-assembly.

WAGO 731-606/018-000 is a 1-conductor male connector with 2.5 mm² conductor size, 7.5 mm pin spacing, and snap-in mounting feet.

End and intermediate plate for terminal blocks, 2.5 mm thick, light gray.

WAGO 264-363 end plate with fixing flange, 4 mm thick, in light gray.

Plug-in current transformer with 64 A primary, 1 A secondary, and 50/60 Hz frequency rating. DIN rail mounting and push-in connection.

WAGO 231-316/102-000 is a 1-conductor female connector featuring CAGE CLAMP technology, suitable for 2.5 mm² conductors, with 16 poles and an integrated end plate.

WAGO 231-317/037-000: 1-conductor female plug with CAGE CLAMP®, 17 poles, and locking levers. Suitable for PCB interconnects.

WAGO 855-8015 power tap for busbars, featuring a clamping connection and integrated SIBA fuse with indicator for measuring L- or N-conductors.

Intrinsically safe 4-channel analog input module with 0/4 … 20 mA input range, ideal for industrial applications.