Industrial Control Products

WAGO 231-833/001-000 is a 3-pole THT male header with 7.5 mm pin spacing, angled solder pins, and gray color. Suitable for PCB mounting.

WAGO 793-566/000-012 WMB marking card, marked with numbers 1 to 50 (2x), horizontal marking, snap-on type.

WAGO 2204-1305 TOPJOB S 3-conductor through terminal block with push-button, for DIN-35 rail, 4 mm² cross-section.

Insulated 6-way adjacent jumper for switching lever, rated 30A, orange. Part of WAGO's TOPJOB S series.

WAGO WMB marking card 793-566/000-024 for horizontal marking, snap-on type, and violet color. Pre-marked with numbers 1-50 (2x).

WAGO 2022-104/123-000: 4-pole female plug connector with push-in CAGE CLAMP, for conductors up to 4 mm², rated 690V and 6kV impulse.

The WAGO 2007-8448 is an 8-way insulated orange jumper designed for switching levers, rated at 30A, and compatible with DIN-35 rail mounting.

WAGO 870-928 separator plate, 2mm thick, gray, UL94 V0 rated. Ideal for rail-mounted terminal blocks.

3-conductor through terminal block with 1.5 mm² conductor size, compatible with DIN-rail 35 x 15 and 35 x 7.5, using CAGE CLAMP® technology.

9-pole 2-conductor terminal strip for rail mounting, suitable for plate thickness 0.6 - 1.2 mm.

WAGO 281-343 end and intermediate plate, 2.5 mm thick, orange, for rail-mounted terminal blocks.

3-conductor through terminal block with push-button, test port, and DIN-rail mounting. Suitable for Ex e II applications.

WAGO 2110-1291 end and intermediate plate, 1 mm thick, gray, for 864.

4-conductor through terminal block with push-button and test port, suitable for Ex e II applications.

The WAGO 2020-209 is a 2-conductor female connector featuring push-in CAGE CLAMP technology, designed for conductors up to 1.5 mm². It is part of the 2020 series and is ideal for front-entry wiring.

The WAGO 281-313 is an end and intermediate plate designed for use with rail-mounted terminal blocks, featuring a thickness of 2.5 mm and an orange color.

WAGO 215-311 black male banana plug, 4 mm Ø, 2.50 mm² wire size, cage clamp termination, nickel plated, 20A/42V rated.

This light grey 10 way push-in type jumper terminal is designed for use with WAGO TOPJOB S 4 mm^2 DIN rail mount terminal blocks.

2-conductor through terminal block with push-button and test port, suitable for DIN-rail 35 x 7.5 mm and Ex e II applications.

The WAGO 2204-1306 is a 3-conductor through terminal block with push-button, test port, and side/center marking slots. It is suitable for Ex e II applications and mounts on a DIN-rail.