Industrial Control Products

20-pole connection cable with pluggable connector per DIN 41651, 0.14 mm² conductor cross-section, and 4m length.

Reliable 1-conductor female connector with CAGE CLAMP, 2.5 mm², 5 mm pin spacing, and 100% protection against mismating.

The WAGO 858-110 Ejector is a component for basic relays, measuring 25 mm x 35 mm, ideal for industrial use.

The WAGO 286-665 module monitors AC currents from 1 A to 10 A, featuring a single changeover contact.

The WAGO 789-520 is a relay module designed for industrial applications, featuring a nominal input voltage of 24 VAC, one make contact, and a limiting continuous current of 16 A.

The WAGO 283-409 is an insulated jumper, gray in color, designed for use with WAGO rail-mount terminal blocks. It is ROHS compliant and sold in packs of 25.

WAGO 732-111/026-000 is a 1-conductor female connector, angled, with CAGE CLAMP technology for reliable connections.

The WAGO 2016-499 is a step-down jumper used to connect between different series of terminal blocks, such as 2016/2010 to 2010/2006/2004/2002 and 2216/2210 to 2210/2206/2204/2202. It is insulated and light gray in color.

Strain relief housing for 3-pole connectors, compatible with female and male connectors, 5mm pin spacing.

Double pin header with 7 poles, 5.08 mm pin spacing, and orange color. Mounts on DIN-35 rail.

3-pole sensor/actuator cable with angled M8 socket and plug, 1m length, IP67 protected for industrial use.

10-pole feedthrough terminal block with 2.5 mm² wire cross section, CAGE CLAMP® connection, and 5.08 mm pin spacing.

Sensor/Actuator cable with M12A plug, straight, 4-pole, 5m length. Ideal for automation applications.

WAGO 2006-402 is a 2-way insulated push-in type jumper bar suitable for various industrial and modern building installations.

Sensor/actuator cable with M12 plug, 5-pole, 10m. Halogen-free, UV-resistant, and suitable for drag chains.

WAGO 289-406 interface module with 34-pole pluggable connector per DIN 41651, suitable for PCB terminal blocks with mounting feet.

10-pole THT female header with 5mm spacing, locking lever, and 0.6x1.0mm solder pins. ROHS compliant.

Switching module with a changeover rocker switch, operating at up to 250 VAC and 10 A.

WAGO 226-119 spacer for 2.5mm plate thickness. Ideal for electrical connections and spacing applications.

Component module with 2K4 resistor, 5W power rating. Suitable for industrial automation, ensuring safe isolation and function levels.