Industrial Control Products

Insulation stop for 0.25 - 0.5 mm² conductors. Light gray, 5 pieces per strip. Suitable for WAGO terminal blocks.

WAGO 2091-1405 THT male header, 5-pole, 3.5 mm pin spacing, suitable for PCB applications.

WAGO 794-615/000-005 marking card, marked F1 to F10, for 5-5.2mm terminal blocks, red, snap-on.

Intrinsically safe, 2-channel analog output module for extended temperature ranges, featuring 12-bit resolution and 2ms conversion time.

Stackable PCB terminal block with 1 pole, 20 mm pin spacing, and CAGE CLAMP® technology. Ideal for Ex-i applications.

MODBUS controller with RS-232 interface, 115.2 kBd, for industrial automation and control.

4-channel digital input module with 5 VDC, 0.2 ms response time, and CAGE CLAMP® connections.

WSB marking card for terminal blocks, marked 101-150, horizontal, snap-on, white.

3-conductor terminal block for actuator supply with ground contact, colored entries, and CAGE CLAMP® technology.

WAGO 285-634 terminal block, 2-conductor, 35 mm², blue, for DIN 35 x 15 rail with integrated end plate and CAGE CLAMP®.

WAGO 727-225/024-000 is a 16-position feed-through terminal block with locking clips, suitable for 16-28 AWG wires.

This 4-pole THT male header features 7.5 mm pin spacing, angled pins, and is 100% protected against mismating. It is made from high-quality materials including polyamide insulation and chrome-nickel spring steel.

WAGO 734-304/019-000 male connector with CAGE CLAMP, 1.5 mm², 3.5 mm pin spacing, and 100% protection against mismating.

Yellow protective warning marker for 5 terminal blocks, featuring a high-voltage symbol. Pack of 50.

The WAGO 257-300 is a splicing connector designed for secure and efficient electrical connections. It supports various conductor sizes and is rated for high voltage applications.

80-pole Matrix patchboard for Ex i applications, 500 V nominal voltage, 10 A rated current, and 1.50 mm² wire cross section.

The WAGO 726-821 is an 80-pole matrix patchboard with gray/white modules and vertical marking, ideal for rail mount applications.

2-conductor PCB terminal block with 10 mm² cross-section, 7.5 mm pin spacing, and 12 poles. Features Push-in CAGE CLAMP connection.

10-way, 3-pole M8 sensor/actuator box with a 10-meter connecting cable.

The WAGO 770-633 is a 3-pole H-Distribution Connector with Cod. A, featuring 1 input and 2 outputs, and 2 locking levers.