Industrial Control Products

16-pole female connector with CAGE CLAMP®, 3.5mm pin spacing, and 100% protection against mismating. Ideal for secure and reliable connections.

6-pole through-panel PCB terminal strip with 2.5 mm² wire size, integrated push-buttons, and CAGE CLAMP® technology.

2-conductor disconnect terminal block for DIN-rail mounting, with CAGE CLAMP technology and 4 mm² wire cross section.

Mounting carrier for 2-way inline splicing connectors. Features lever and snap-in mounting foot. Gray color.

Controller DeviceNet module for industrial automation, supports DeviceNet protocol and integrates with WAGO I/O systems.

2-channel analog input module for 0-20 mA or 0-10 V inputs, 24VDC, DIN Rail mounting.

Stud terminal block for 120 mm² conductors, DIN-35 rail mountable, beige, UL94 V0 rated.

The WAGO 727-217 is a 4-level end plate designed for DIN rail terminal blocks, featuring a thickness of 7.62 mm and an orange color.

Mounting carrier for 2-conductor terminal blocks, compatible with 4 mm² wires, designed for panel and screw mounting.

WAGO 284-342 is a light gray, 2 mm thick, oversized separator plate for DIN rail terminal blocks.

WAGO 264-112 is a 2-conductor terminal strip with 12 poles, suitable for screw or similar mounting types.

End and intermediate plate for TOPJOB S terminal blocks, 1 mm thick, gray.

TOPJOB S 4-conductor sensor supply terminal block with green LED, ground contact, and push-in CAGE CLAMP.

7-position 2-conductor PCB terminal block with 7.5 mm pin spacing, push-in CAGE CLAMP®, and 10 mm² wire cross section.

Feedthrough terminal block for reliable connections, featuring 0.8x1.6 mm contact pins and a nominal cross-section of 4 mm².

Angled 1-conductor female connector with CAGE CLAMP technology for 0.08 … 2.5 mm² / 28 … 12 AWG wires.

The WAGO 753-479 is a 2-channel analog input module with ±10 VDC differential input, designed for industrial automation applications.

WAGO 252-104 is a 2-conductor female PCB connector strip with PUSH WIRE® technology, suitable for 0.8 mm Ø wires and 3.5 mm pin spacing.

WAGO 231-205/031-000: 1-conductor female connector, CAGE CLAMP, 2.5 mm², 7.5 mm pin spacing, 5-pole, gray.

THT male header with 1.2 x 1.2 mm solder pins, straight, 7.62 mm pin spacing, 7-pole, orange.