Industrial Control Products

High-density, triple-deck PCB terminal block with 9 poles, 5 mm pin spacing, and 2.5 mm² wire size.

WAGO 231-865 connector for reliable, tool-free electrical connections. Ideal for industrial and residential use.

The WAGO 231-159 is an operating tool designed for use with WAGO electrical components. It is made of natural materials and weighs 1.4g.

WAGO 231-902 is a 2-way, insulated comb-style jumper bar for 5 mm conductors.

CANopen/DeviceNet cable for networking sensors and actuators, 5-pole, M12A angled socket, 2m length.

Wago 2091-1523/002-000: 3-pole male connector with push-in CAGE CLAMP, 1.5 mm², 3.5 mm pin spacing, and integrated release lever.

3-conductor actuator terminal block for NPN switching with ground contact, push-in connections, and DIN-35 rail mount.

Strain relief plate for securing cables to 10 mm wide terminal blocks. 6-pole, gray color.

WSB marking card, snap-on type for 4mm wide terminal blocks, vertical marking, white, 9/10 (50 each), not stretchable.

6-pole PCB terminal block with 2.5 mm² wire cross-section, 7.62 mm pin spacing, and CAGE CLAMP technology for reliable connections.

PCB terminal block with 5 positions, featuring operating levers and a jumper slot. Suitable for 6 mm² wire size and 10 mm pin spacing.

WAGO 209-733 WSB marking cards for vertical marking, white, 50 pieces per pack. ROHS compliant and snap-on type.

Compact 2-conductor terminal block for DIN rail mounting, suitable for 22 AWG wires, featuring snap-in mounting and test ports.

The WAGO 2002-480 is a 10-position staggered jumper designed for DIN rail mounting, ideal for various industrial and building applications.

Insulated adjacent jumper for switching lever, 2-way, 30 A, orange. Compatible with 2-conductor transverse switching terminal blocks.

1-conductor female connector with CAGE CLAMP technology, 12-pole, and mismating protection. Ideal for PCB interconnects.

TOPJOB S 4-conductor sensor terminal block with yellow LED for NPN sensors, featuring push-in type jumper bars for ground connection.

Triple-deck terminal block for DIN-rail 35 x 15 and 35 x 7.5, with CAGE CLAMP® and 2.5 mm² wire size.

THT female header with angled solder pins, 4-pole, locking lever, and 5.08 mm pin spacing for secure board-to-board and board-to-wire connections.

WAGO 726-142 Matrix Patchboard, 32-pole, for Ex i applications, blue modules, vertical marking.