Industrial Control Products

Busbar carrier for DIN 35 rail, 140 mm wide, 24 mm high, gray color.

PCB terminal block with lever, 16 mm², pin spacing 10 mm, 5-pole, Push-in CAGE CLAMP®

Straight THT male header with 1.2 x 1.2 mm solder pins, 7.5 mm pin spacing, and 100% mismating protection.

The WAGO 2706-212 is a 12-pole PCB terminal block with 10mm pin spacing and 6mm² wire size, equipped with an operating lever for easy connection.

Double-deck terminal block for DIN-rail 35 x 15 and 35 x 7.5, with jumper position on lower level.

The WAGO 746-2309 is a 9-pole, 2-conductor PCB terminal block with 7.5 mm pin spacing and push-in CAGE CLAMP connection, ideal for signal transmission and power distribution.

Non-stretchable, snap-on marking strips for easy labeling of electrical components.

17-pole PCB terminal block with 3.5 mm pin spacing, push-in CAGE CLAMP®, and 1.5 mm² cross-section.

WAGO 2002-2214/1000-491 double-deck terminal block with 2 x 1N4007 diodes, suitable for DIN-rail mounting and push-in connections.

6-position female terminal block plug with 5mm pitch, push-in CAGE CLAMP®, and 100% mismating protection.

WAGO 2616-3358 is an 8-position wire to board terminal block with 15mm pin spacing, featuring push-in CAGE CLAMP technology.

7-position PCB terminal block with push-in CAGE CLAMP and operating lever, ideal for AWG 18-4 wires.

DC/DC Converter converting 24 VDC to 12 VDC with 4 A output current, galvanically isolated.

2-conductor female connector with Push-in CAGE CLAMP®, 2.5 mm², 10-pole, and lateral locking levers.

WAGO 741-324 is a 4-pole through-panel PCB terminal strip with integrated push-buttons, 2.5 mm² wire size, and 7.5 mm pin spacing.

System cable for Siemens S7-300, 2 x 16 digital I/O, 3m long, 0.14 mm² conductor.

WSB marking card for vertical marking. Includes labels for A, B, P, N, PE, PEN, L1, L2, L3, and Ground. White, snap-on type, not stretchable.

2-conductor female connector with Push-in CAGE CLAMP, 1.5 mm², 12-pole, rated 13.5 A and 500 V.

2-pole PCB terminal block with lever, 6 mm² wire cross section, 7.5 mm pin spacing, and CAGE CLAMP® technology.