Industrial Control Products

WAGO 231-107/027-000 female plug, 7-pole, 12 AWG max, with mounting flange and reinforcing strip. Easy cable pre-assembly and on-unit wiring.

PFC200 Controller with 2x ETHERNET, RS-232/-485, CAN, CANopen, PROFIBUS Slave. Ideal for industrial automation and telecontrol applications.

WAGO 721-233/001-040 THT male header, 3-pole, straight, 7.5mm pin spacing. 100% protected against mismating with preceding ground contact.

2-conductor female connector with push-in CAGE CLAMP, 2.5 mm² wire size, and 5.08 mm pin spacing. Integrated end plate.

Cable entry plate for F204 and F304 flange plates, featuring 29 entries (Ø 3.0-6.5 mm) and IP65 protection.

WAGO 231-116/037-000 is a 16-pole, 1-conductor female connector with 5mm pin spacing and lateral locking levers.

WAGO 2706-203 is a 3-pole PCB terminal block with an operating lever, featuring a 6 mm² cross-section and 10 mm pin spacing.

2-conductor female connector with Push-in CAGE CLAMP®, strain relief plate, and front-entry wiring for 2020 series terminal blocks.

6-pole PCB terminal block with lever and jumper slot, 6 mm² cross-section, 7.5 mm pin spacing, CAGE CLAMP® technology.

High-quality WAGO 2020-110/000-036 electrical connector for reliable connections.

WAGO 2002-3211/1000-675 is a triple-deck diode terminal block with 1N4007 diode, designed for DIN-rail mounting.

Triple-deck diode terminal block with 1N4007 diodes, rail mount, and push-in termination. Ideal for multi-level connections.

WAGO 2010-402 TOPJOB®S jumper, 2-way, insulated, light-gray for rail-mounted terminal blocks.

WAGO 281-402 insulated jumper for connecting wires in 864.

High-quality Cat. 6A RJ-45 Ethernet connector, straight, T568B wiring code, AWG 24, ideal for industrial and commercial use.

WAGO 210-112 steel carrier rail, 35 x 7.5 mm, 1 mm thick, 2 m long, slotted, EN 60715 compliant.

Stackable PCB terminal block with 6 mm² cross-section, 7.5 mm pin spacing, and CAGE CLAMP® technology.

Angled 1-conductor female connector from WAGO, 4 mm², 5 mm pin spacing, 3-pole with coding finger.

WAGO 750-404/000-002 Peak Time Counter for precise time measurement with 24V DC input and 32-bit counter depth.

9-pole through-panel PCB terminal strip with 7.62 mm pin spacing, integrated push-buttons, and suitable for wires up to 2.5 mm².