Industrial Control Products

1-conductor female plug from WAGO's 231 series, suitable for PCB connections with 2.5 mm² conductor size.

A single-channel electronic circuit breaker designed for 24V DC applications, mounted on a 35mm DIN rail.

3-pole THT male header with 5.08 mm pin spacing, threaded flange, and straight 1.0 x 1.0 mm solder pins.

19-pole female connector with push-in CAGE CLAMP, 1.5 mm² conductor, 3.81 mm pin spacing, and lateral locking.

WAGO 793-5520 WMB marking card, suitable for horizontal marking, snap-on type, and white in color.

1-conductor female connector with push-in CAGE CLAMP, 1.5 mm² wire cross section, and 100% protection against mismating.

Converts frequency signals to current/voltage outputs. Configurable frequency range: 0.1 Hz to 120 kHz.

Efficient 24VDC, 20A power supply with PowerBoost and TopBoost for industrial use.

Space-saving 2-conductor end terminal block with push-buttons on both sides, suitable for Ex i applications.

2-conductor miniature through terminal block with push-button, for DIN-15 rail, featuring Push-in CAGE CLAMP connections.

End and intermediate plate for terminal blocks, 2.5 mm thick, gray.

Angled THT female header with 10 poles, 7.5mm pin spacing, and 100% protection against mismating.

9-position terminal block header with male pins, shrouded, and vertical through-hole mounting. Ideal for secure connections.

The WAGO 788-115 is a 4-way insulated jumper designed for use in terminal blocks. It is light gray in color and suitable for various electrical connections.

WAGO 897-231 flat cable, 3G 2.5 mm², PVC insulation, L + PE + N configuration, 0.6/1 kV rating.

Insulated jumper for WAGO 2001 series, connects 1 to 4 terminals. Light gray, part number 2001-434.

Through-panel PCB terminal strip with wire-wrap pin 1 x 1 mm, 5-pole, and 5 mm pin spacing.

15-pole interface module with solder connection and vertical mounting.

WAGO 2002-7211 is a reliable rail-mounted terminal block for power distribution. It supports 250V, 32A, and 4kV surge voltage.

40-pole interface module with male connector per DIN 41651, designed for PCB terminal blocks and double-row mounting carrier.