Industrial Control Products

WAGO 255-607 PCB terminal block with push-button and CAGE CLAMP for secure connections. Ideal for various applications.

TOPJOB S ground terminal block, rail mount, 3-conductor, 12 AWG capacity, ideal for DIN rail applications.

2 mm thick, oversized, gray separator plate.

Triple-deck terminal block; Shield/through/through terminal block; 2.5 mm²; with marker carrier; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 2,50 mm²; white/blue/gray.

10 mm², CAGE CLAMP®, blue, 1-conductor N-disconnect terminal block.

1 mm thick orange end and intermediate plate for 864.

Snap-in connector label for 5mm wide terminal blocks.

Double-deck terminal block; 4-conductor through terminal block; N; suitable for Ex i applications; internal commoning; conductor entry with violet marking.

4-conductor carrier terminal block for DIN-rail 35 x 15 and 35 x 7.5, 2.5 mm² conductor capacity, CAGE CLAMP®.

3-conductor ground terminal block with lever and Push-in CAGE CLAMP.

WAGO 2601-3110 PCB terminal block with push-in CAGE CLAMP and operating lever, suitable for 26-14 AWG wires, 10-pole, 3.5mm pitch.

PCB terminal block with Push-in CAGE CLAMP connection, suitable for solid and ferruled conductors.

Pre-assembled interconnecting cable; Cca; Socket/plug; 5-pole; Cod. I; H05Z1Z1-F 5G 1.5 mm²; 7 m; 1,50 mm²

WMB marking card; as card; MARKED; +/- (50x); not stretchable; Horizontal marking; snap-on type; red

Multilevel installation terminal block with push-in CAGE CLAMP technology for efficient connection management.

WAGO's 756-3205/140-100 is a pluggable connection solution ideal for various applications, including intercom systems, electrical ovens, and hazardous locations.

3-conductor ground terminal block; 10 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 10,00 mm²; green-yellow.

2-conductor through terminal block; 4 mm²; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP.

1-conductor female connector; Push-in CAGE CLAMP; 4 mm²; Pin spacing 5.2 mm; 15-pole; 4,00 mm²; gray, green-yellow.