Industrial Control Products

1-conductor female connector with CAGE CLAMP technology, suitable for various applications.

1-conductor male connector with 100% protection against mismating, lever actuation, and silver-plated contacts.

High-quality electrical connector with durable construction, easy to install and use. Suitable for various applications and compliant with industry standards.

24 Position Wire to Board Terminal Block with 45° (135°) Angle and 0.100\

The WAGO 2-conductor combi strip (734-367) is 100% protected against mismating, featuring a cross-sectional area of 1.5 mm² and 7 poles with a pin spacing of 3.5 mm.

High-density quadruple-deck PCB terminal block with CAGE CLAMP technology.

4-conductor carrier terminal block designed for DIN-rail 35 x 15 and 35 x 7.5, featuring a 2.5 mm² cross-section and CAGE CLAMP® connection technology.

The WAGO 735-304 is a compact PCB terminal block designed for reliable connections. It features a push-button mechanism and is rated for 1.5 mm² conductor size.

Connector end plate for terminal blocks, 1.5 mm thick, snap-fit type.

The WAGO 257-612 is a reliable and efficient PCB terminal block designed for various industrial applications.

24-pole female connector with 5 mm pin spacing, suitable for 12 AWG max conductors. Gray color, ROHS compliant.

10-position terminal block with 2.54 mm pitch, suitable for PCB interconnects.

WAGO's 890-1904 3-way distribution connector provides reliable and efficient signal distribution in industrial automation applications. It features 2-pole and Cod. I with 1 input and 3 outputs in a blue design.

The WAGO 738-108 is a reliable and efficient quadruple-deck PCB terminal block designed for various electrical applications.

Power tap with fuse, suitable for 8-6 AWG, phase.

WAGO 721-442/001-000 THT male header; 1.0 x 1.0 mm solder pin; angled; 100% protected against mismating; Pin spacing 5 mm; 12-pole; light gray.

WAGO's 771-9385/267-502 is a pre-assembled connecting cable designed for industrial use. It features a 5-pole, plug/open-ended design with a 2.5 mm² cross-section.

Insulated 7-way jumper bar for WAGO 2002 series.

WMB Multi marking system; Vertical marking; F71, ..., F80 (10x); for terminal block width 5 - 17.5 mm; 10 strips with 10 markers per card.

4-conductor through terminal block for Ex e II and Ex i applications, side and center marking.