Industrial Control Products

WMB Multiple marking system for terminal block width 5 - 17.5 mm, 10 strips with 10 markers per card.

Compact, high-quality terminal block set for efficient wiring in industrial and commercial applications.

End plate for PCB terminal blocks, 1 mm thick, snap-fit type, gray color.

WAGO 793-507/000-002 terminal block markers are designed for horizontal marking, ideal for terminal block widths 5-17.5 mm. RoHS compliant and available in yellow.

Low-voltage current transformer for operating voltages up to max. 1.2 kV, vibration- and shock-resistant, UL recognized components.

The WAGO 2009-192 group marker carrier is designed for use with terminal blocks, offering a reliable and efficient solution for industrial applications.

Beige, single-deck stud feed-through terminal block for DIN-35 rail mounting.

Stackable PCB terminal block; 2.5 mm²; Pin spacing 10/10.16 mm; 1-pole; CAGE CLAMP®; commoning option; light green.

WAGO 248-518 connectors and interconnects for reliable connections.

6-pole male header with 1.2 x 1.2 mm solder pins, ideal for PCB interconnects.

WAGO's 756-5201/030-005 is a high-quality sensor/actuator cable designed for industrial use.

The WAGO 236-623 PCB terminal block offers 23 poles, 2.5 mm², and CAGE CLAMP technology for reliable interconnect solutions in various applications.

For NPN (low-side) switching actuators; with ground contact; 2-pole; rail mount; 3-conductor; 7 mm wide; gray.

WAGO 2042-321: Transparent 4-pole empty component plug housing with fiber optics for versatile use.

WAGO 793-507/000-023 WMB marking card; as card; MARKED; 51 ... 100 (2x); not stretchable; Horizontal marking; snap-on type; green.

A 3-conductor ground terminal block designed for use on DIN-rail 35 x 15 and 35 x 7.5, featuring CAGE CLAMP technology and a green-yellow color.

Antenna splitter with 3 SMA sockets for GSM/UMTS applications.

Configure and monitor RTD sensors with the WAGO 2857-533 signal conditioner. Adjustable software filter and safe isolation.

4-conductor ground terminal block; 2.5 mm²; lateral marker slots; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 2,50 mm²; green-yellow.

5-pole T-distribution connector with 1 input and 2 outputs, 3 locking levers, and black finish.