Industrial Control Products

Snap-fit end plate for printed circuit applications, 1 mm thick, blue color.

Insulation stop for 0.75 - 1 mm², dark gray.

2-conductor through terminal block; 35 mm²; with integrated end plate; side and center marking; only for DIN 35 x 15 rail; CAGE CLAMP®; 35,00 mm²; blue

Sensor/Actuator cable; M8 socket; straight; M8 plug; straight; 4-pole; Length: 0.5 m

1-conductor female plug with push-button and lateral locking levers.

WAGO 282-440 jumper is an insulated, 10-way terminal block designed for high current applications.

Double-deck terminal block for DIN-rail 35 x 15 and 35 x 7.5, push-in CAGE CLAMP, 1 mm², gray.

Operating tool with partially insulated shaft, blade 2.5 x 0.4 mm, short and angled.

10m length, M8 socket, straight, 3-pole sensor/actuator cable.

WMB marking card for continuous marking of terminal blocks.

Basic relay with 2 changeover contacts, suitable for 24 VDC input voltage, and limiting continuous current of 8 A.

WAGO 805-303 PCB terminal block; push-button; 1.5 mm²; Pin spacing 3.5 mm; 3-pole; Push-in CAGE CLAMP®; 1,50 mm²; gray.

The WMB marking card 794-4617 is a snap-on type marking card designed for vertical marking. It is available in white and features 10 markings from F21 to F30.

PCB terminal block with push-in CAGE CLAMP technology, 26-14 AWG wire size, and 11-pole configuration.

WAGO 756-5302/060-050 sensor/actuator cable with M12A socket, angled, 5-pole, and 5 meters long.

Insulating 3-way operating tool for use with female and male connectors.

4-conductor chassis-mount terminal strip with ground contact.

4-conductor ground terminal block with push-buttons, 2.5 mm², for DIN-rail 35 x 15 and 35 x 7.5.

4-conductor through terminal block with push-button, suitable for Ex e II applications.

Reliable 24VDC relay module with 2 changeover contacts and 8A continuous current. Includes red status indicator and measures 15 mm wide.