Industrial Control Products

The 770-688 distribution connector is designed for switches, offering a single-pole and throttle two-way circuit with 3 poles, 1 input, and 5 outputs.

2-conductor miniature through terminal block with operating slots, 2.5 mm², with test port, side and center marking, for DIN-15 rail, Push-in CAGE CLAMP.

The WAGO 2052-315 is a versatile terminal block designed for Ex e II applications, featuring a snap-in mounting foot and side/lateral and center marking slots.

Distribution connector for switches with 3 poles and 5 outputs.

2-conductor miniature through terminal block; with operating slots; 2.5 mm²; with test port; side and center marking; for DIN-15 rail; Push-in CAGE CLAMP®; 2,50 mm²; gray.

Strain relief housing for 2 cables, 6-pole.

Gray end plate for the TOPJOB S series, suitable for various industrial automation applications.

8-level same potential terminal block; with locking clips; all clamping units internally commoned; with 2.3 mm Ø test port; for 35 x 7.5 mounting rail.

2-conductor miniature through terminal block with operating slots, 2.5 mm², snap-in mounting foot, side and center marking, test port.

2-conductor miniature through terminal block with push-button carrier unit, 2.5 mm², red.

2-conductor miniature through terminal block; with operating slots; 2.5 mm²; Center terminal block without snap-in mounting foot, without mounting flange; side and center marking; with test port; Push-in CAGE CLAMP®; 2,50 mm²; blue.

Brown, feed-through miniature center terminal block for Ex e II applications.

Industrial unmanaged ECO switch with 7 ports, including 5 RJ45 and 2 SFP slots for fiber optic connections.

The WAGO 852-303 is an industrial managed Ethernet switch designed for harsh environments, featuring 11 ports and a redundant DC power supply.

1-conductor female connector; push-button; Push-in CAGE CLAMP; 1.5 mm²; Pin spacing 3.5 mm; 3-pole; 100% protected against mismating.

2-conductor miniature through terminal block; with operating slots; 2.5 mm²; End terminal block with mounting flange; side and center marking;

The WAGO 852-1812/010-000 Lean Managed Switch is designed for efficient network management with 8 ports of 1000Base-T.

8 Ports 1000Base-T, 2-Slot 1000BASE-SX/LX, 8 * Power over Ethernet (PoE)

Double-deck diode terminal block with 2 diodes 1N4007, suitable for DIN-rail mounting, 4 mm² CAGE CLAMP.

The WAGO 2000 series offers high-performance electrical connectors designed for demanding industrial environments.