Industrial Control Products

3-conductor through terminal block with push-button, suitable for Ex e II applications, side and center marking, for DIN-rail 35 x 15 and 35 x 7.5.

Universal connection for all conductor types; Easy cable pre-assembly and on-unit wiring via vertical and horizontal CAGE CLAMP® actuation.

WAGO's 736-224 double-deck PCB terminal block is designed for reliable connections with its 48 poles and 5 mm pin spacing.

Finger guard, touchproof cover protects unused conductor entries.

The WAGO 852-1328 is a 6-port industrial Gigabit managed Ethernet network switch featuring redundant DC power supply capabilities.

Connector gripping plate for picoMAX series, ideal for conductors and reliable connections.

End plate with fixing flange for standard chassis mounting blocks.

4-conductor through terminal block designed for Ex i applications with lateral marker slots, suitable for DIN-rail 35 x 15 and 35 x 7.5.

1-conductor female connector with push-button actuation and 100% protection against mismating.

Snap-in through-panel plug for 2-pole connections.

Through-panel terminal block; with end plate and retaining clip; 10-pole; for plate thickness 1-4 mm; 7 mm wide; gray.

WAGO 890-722 Winsta through-panel socket (female) with 2-pole and 1.50 mm² wire size.

Feedthrough terminal blocks with screwdriver-actuated CAGE CLAMP on both sides

3-conductor component terminal block with diode 1N4007; anode, right side; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm²; CAGE CLAMP®; 4,00 mm²; gray.

T-distribution connector with 3 poles, 1 input, and 2 outputs, featuring 2 locking levers.

T-distribution connector; 5-pole; Cod. A; 1 input; 2 outputs; 2 locking levers; white

4-conductor disconnect terminal block; center marking; 5 mm wide; blue

LED terminal block with red LED, 24VDC, rail-mount, 4-conductor, 5 mm wide, gray.

The WAGO 770-605 is a 5-pole intermediate coupler designed for use with sockets and plugs.

2-conductor miniature through terminal block with operating slots, 2.5 mm², end terminal block with mounting flange, side and center marking, with test port, Push-in CAGE CLAMP.