Industrial Control Products

The WAGO 256-500 is a snap-fit end plate designed for use with WAGO's 256 series PCB terminal blocks. It offers a secure and reliable connection solution for your electronic projects.

18-position wire to board terminal block with locking slides and CAGE CLAMP.

Angled THT female header with 12 poles and 3.5 mm pin spacing.

4-conductor fuse terminal block with pivoting fuse holder and end plate.

4-conductor disconnect/test terminal block with push-button and test option.

2-conductor fuse terminal block with pivoting fuse holder and additional jumper position. Suitable for 5 x 20 mm miniature metric fuses and includes push-button and LED blown fuse indication.

2-conductor female connector; push-button; PUSH WIRE; 0.8 mm Ø; Pin spacing 3.5 mm; 10-pole; for solder pin strip; 0,50 mm²; gray

3-conductor through terminal block; 10 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP.

4-channel digital input module for industrial automation.

2 mm thick separator plate for 864.

WAGO 2009-412 push-in type wire jumper, insulated, 60 mm long, 1.5 mm² conductor cross section, suitable for 2001, 2002, 2003, and 2022 series terminal blocks.

The WAGO 236-402/334-604 THR PCB terminal block provides secure and stable connections with its CAGE CLAMP technology.

Reliable wire-to-board connections with the WAGO 2601-1106 terminal block.

1 mm thick end and intermediate plate for TOPJOB S rail mount terminal blocks.

Reliable THT female header with 5mm pin spacing and 4-pole configuration for diverse electrical applications.

WAGO 745-1352 is a 2-position wire to board terminal block designed for reliable connections.

The WAGO 236-715 is designed for high-density PCB applications, offering a commoning option for easy connection management.

The WAGO 261 series feed-through terminal strip is a gray, 1-deck/level component with buttons on both sides and snap-in mounting feet. It features 5 feed-through poles, accommodating 10 wires (5 clamps on each side), and supports wire sizes from 0.08mm² to 2.5mm² (#28AWG to #14AWG). Rated for a current of 24A, it utilizes CAGE CLAMP spring connections and can be mounted on a DIN rail or surface using accessory snap-in foot mounting.

Stud terminal block with lateral marker slots, suitable for DIN-rail 35 x 15 and 35 x 7.5, featuring 3 studs M6, and a cross-sectional area of 35.00 mm², available in gray.