Industrial Control Products

THT double-deck male header with 18 poles, 3.5 mm pin spacing, and CAGE CLAMP® technology for secure connections.

1-conductor male connector with lever and Push-in CAGE CLAMP®. 16 mm², 3-pole, 100% protected against mismating.

WAGO 721-611/114-000 male connector, 2.5 mm², 5 mm pin spacing, 11-pole, snap-in flange, 100% protected against mismating.

The WAGO 2000-510 TOPJOB® S is a 1-pole, gray modular connector for the 2000 series, ideal for jumper contact slots.

2-conductor through terminal block for DIN-rail mounting, suitable for Ex e II applications with push-in CAGE CLAMP connection.

The WAGO 264-186 is a 6-pole, 2-conductor terminal strip with snap-in mounting feet, compatible with plate thicknesses of 0.6 - 1.2 mm.

The WAGO 737-512 is a triple-deck PCB terminal block featuring 36 poles, 2.5 mm² cross-section, and 7.5 mm pin spacing.

Red cable tie markers by WAGO, 25x11 mm, for use with cable ties and Smart Printers.

WAGO 793-501/000-006 WMB marking card, blue, snap-on, plain, 100 labels per card.

Halogen-free flat cable with 5G 4 mm² conductors, 3L + N + PE configuration, rated 0.6/1 kV.

WAGO 750-880/025-000 TOPJOB S Terminal Block: Reliable, maintenance-free electrical connections with CAGE CLAMP® technology.

WAGO 734-472 THT female header, straight, 12-pole, 3.5mm pin spacing. 100% protected against mismating.

WAGO 756-5312/040-100 is a 10m long sensor/actuator cable with an angled M12A 4-pole plug, suitable for industrial automation.

6-pole female connector with 5mm pitch, 28-12 AWG wire range, integrated test ports, and UL94V-0 rating.

WAGO RS-232 C Serial Interface for industrial and automation applications. 19200 baud, even parity, 8/1 bits.

End and intermediate plate for WAGO 864. Thickness: 2.5 mm, Color: Gray.

4th generation Controller EtherNet/IP with 2 x ETHERNET ports, supporting 10/100 Mbit/s and full/half-duplex transmission.

WAGO 231-166/003-000 male header for PCB connections. 6-pole, THT, 1.2 x 1.2 mm pins, 5 mm spacing.

WAGO 231-623/019-000 is a 1-conductor male connector with CAGE CLAMP, 2.5 mm² wire size, and 5 mm pin spacing.

The WAGO 704-5014 interface module is designed for system wiring with a 20-pole male connector and 16-channel relay output.