Industrial Control Products

Compact PCB terminal block with 3 poles, push-button actuation, and push-in CAGE CLAMP technology for reliable connections.

Compact 2-conductor through terminal block with operating slots and mounting flange, suitable for 2.5 mm² wires.

WAGO 249-115 test plug adapter for 255, 256, 257 Series PCB terminal blocks. Rated 320V, 6A, 4kV surge.

Miniature through terminal block with 2.5 mm² nominal cross-section, push-in CAGE CLAMP, and mounting flange.

1-conductor female connector with push-in CAGE CLAMP, 2.5 mm², 5 mm pin spacing, and 100% mismating protection.

Carrier with grounding foot, 25 mm long, made of Cu 10 mm x 3 mm. Suitable for 790-108 and 790-116.

WAGO 812-101 Busbar Terminal Block for (10 x 3) mm busbars with Push-in CAGE CLAMP® and 4.00 mm² conductor cross-section.

WAGO 769-103/000-037 1-Conductor Female Connector. Tool-free, spring pressure connection for efficient and reliable electrical connections.

Double-deck terminal block for ground and neutral-through connections. Push-in CAGE CLAMP, DIN-35 rail mount.

WAGO 756-9216/040-000: 4-pole M12 right angle fitted pluggable connector with screw connection for reliable electrical connections.

WAGO 2020-5417/1102-950 terminal block for PNP sensors, featuring a yellow LED, ground contact, and push-in connections.

2-channel digital relay output module with 250Vac/30Vdc and 2A rating, designed for DIN-35 rail mounting.

2-channel analog input module for 0-20 mA signals, single-ended, 16-bit resolution. Powers field-side signal conditioners and transmits isolated signals to the bus system.

WAGO 2020-2203 terminal block with 2 positions, gray, 3.5mm width. Features push-in CAGE CLAMP technology and front-entry wiring.

WSB marking card by WAGO for vertical marking. Snap-on type, white color.

The WAGO 753-434 is an 8-channel digital input module with 5/12 VDC and 0.2 ms response time, suitable for industrial automation.

The WAGO 753-465 is a 2-channel analog input module for industrial automation, with 0 … 20 mA input range and single-ended configuration.

A 4-conductor through terminal block with 2.5 mm² cross-section, suitable for Ex e II applications, and mounts on DIN-rail 35 x 15 and 35 x 7.5.

The WAGO 753-469 is a 2-channel analog input module designed for industrial automation. It supports Thermocouple K and includes diagnostic features.

The WAGO 209-758 is a WSB marking card designed for use with terminal blocks. It features vertical marking and is available in white.