Industrial Control Products

WAGO 781-607 2-conductor ground terminal block for DIN-35 rail, compatible with copper and aluminum conductors.

4-conductor terminal strip without push-buttons, suitable for plate thickness 0.6 - 1.2 mm.

Modular tap-off module for 870 Series terminal blocks with jumper slots. ROHS compliant and available in various packs.

WAGO 262-280 4-conductor terminal block for Ex e II applications with snap-in mounting.

Start module for 1-conductor female connectors with push-in CAGE CLAMP and 5.2 mm pin spacing.

Wago 2000-1207 TOPJOB S ground terminal block, ideal for industrial and building applications, featuring 2 conductors and a 3.5 mm width.

WINSTA® MIDI 5-pole male plug with direct ground contact and snap-in installation for efficient connections.

4-conductor DIN-rail terminal block with 1N5408 diode, CAGE CLAMP® technology, and compatibility with 35 x 15 and 35 x 7.5 DIN-rails.

WAGO Sensor/Actuator Cable, M12A straight to angled, 4-pole, 1m. Ideal for industrial sensor and actuator connections.

24-pole PCB terminal block with 0.5 mm² conductor size, 2.54 mm pin spacing, and CAGE CLAMP® technology.

WAGO 254-658 is an 8-pole PCB terminal block with 2.5 mm² wire size and PUSH WIRE® technology.

WAGO WMB marking card, snap-on type, yellow, compatible with terminal block widths 5-17.5 mm.

Angled THT male header with 1.2 x 1.2 mm solder pins, 7 poles, and 100% protection against mismating.

WAGO 769-644/003-000 THT male header, 14-pole, 5mm pitch. Straight, solder termination, through-hole mounting for reliable connections.

WAGO Sensor/Actuator Cable with M8 angled socket and M12A straight plug, 3-pole, 0.5m length, IP67 protection.

WAGO 756-6509/040-015: 4-pole sensor/actuator cable with M8 angled socket and M12A straight plug, 3m long. Suitable for industrial automation.

18-pole male connector with 5.08 mm pin spacing, CAGE CLAMP® technology, and mounting flange.

WAGO 769-133 2-conductor female connector with CAGE CLAMP®, 4 mm², 5 mm pin spacing, and 13 poles.

WAGO 2086-1108/700-000/997-607 connector. Reliable and durable for industrial use.

4-channel analog input module for WAGO-I/O-SYSTEM 750, handling 0-20 mA single-ended signals with 12-bit resolution and electrical isolation.