Industrial Control Products

SOLO Spur Gearbox Z49-K4-(80) Installation Position M1 Oil Level Window Flange Diameter 200 Surface Protection C1 for Normal Environmental Pollution 5015 Sky Blue

Siemens S120 prefabricated power cables for programming 6FX5002-5CR73-1AE5

Contactor AC 50/60 Hz, 240 V AC 3 / 400 V, 6 A, 2.2 kW. Auxiliary contacts: 1 normally open contact, specification 0, screw terminals.

Drawer Circuit Breaker with Guide Frame 4-pole

Helical Gear - Worm Gear Reducer Motor C39-LHN80 Installation Position M1-A Protection Method IP55 Surface Protection C1 For Normal Pollution Degree 7035 Light Gray Anschlusskasten-Lage 3C

Coaxial Gearmotor D129-LEN112 Premium Installation Position M1 Protection Method IP55 Surface Protection C1 For Normal Pollution Degree 7031 Blue-Grey Anschlusskasten-Lage 1A

Siemens 5SY4 UL 1077 Miniature Circuit Breaker 5SY4403-7CV01

Drawer Circuit Breaker with Guide Frame 3-pole

Brake L4/2 Bremsanschlussspannung 380-440V AC Installation position M1 Oil level sight window Protection method IP55 Surface protection C1 For normal pollution degree 7030 steingrau Connection box position 3C

Bevel Gear-Helical Gear Reducer B19-LHN71 Premium MLFB_SPANNUNG_13_3 Installation Position M1-A without OIL LEVEL CONTROL Flange Diameter 120 Protection Type IP55 Surface Protection C1 for normal Pollution Class 7016 Anthracite Grey Junction Box Position 3A

The circuit breaker VT160 has a standard switching capacity of N Icu = 35kA, 415/440 VAC 3-pole, with system protection provided by a thermal-magnetic trip unit. The rated current is IR = 63A for overload protection and II = 630A for short-circuit protection. It does not have an auxiliary trip unit or an auxiliary switch. The terminals are at the rear after insertion.

Circuit Breaker 3VA2 IEC Frame 100 Interrupting Capacity Rating C Icu=110kA @ 415V 3-pole, System Protection ETU330, LIG, In=100A Overload Protection Ir=40A...100A Short Circuit Protection Ii=1.5...12 x In Earth Fault Protection Ig=0.2...1 x In, tg=0.1/0.3S

Prefabricated power cable for programming 4 x 1.5 C, connector: fully threaded, size 1 MOTION-CONNECT 800PLUS drag-chain UL/CSA... 6FX80025CA011CB0

Coaxial Gearmotor D49-LHN80 Premium MLFB_SPANNUNG_13_3 Installation Position M5 Oil Level Window Protection Method IP55 Surface Protection C1 For Normal Pollution Degree 7011 eisengrau Junction Box Orientation 1A

SOLO Spur Gearbox Z49-K2-(100) Installation Position M4 Oil Level Window Flange Diameter 200 Surface Protection C1 for Normal Contamination Level 7016 Smoke Gray Special Coating

Siemens S120 prefabricated power cables for programming 6FX5002-5DG43-1FA0

The joystick is used for the position switch 3SE51/52 metal joystick, with a length of 30mm and a diameter of 30mm.

Contactor, AC-3, 32 A/15 kW/400V, 3 poles, 230V AC, 50/60Hz, 2NO+2NC, screw terminals

Current Transformer, 500/1A, 5VA, Class 1.0

Pluggable transceiver SFP992-1LD, 1x 1000 Mbit/s LC, single-mode glass, up to 10 km, CC.