Industrial Control Products

Siemens 3WL series frame circuit breakers and accessories

The circuit breaker VT100 standard switching capacity is N Icu = 25kA, 3-pole for 415/440 VAC, with system protection through a thermal-magnetic tripping device. IR = 40A for overload protection, II = 500A for short-circuit protection. It has no auxiliary tripper and comes with 1x HS + 1x AS for fixed installation.

Customized Button Product Momentary Type Metal Gloss Red 1NO1NC Flat Head Button 3SU11500AB203FA0ZY19

Siemens SIMOTICS Generation 2 S-1FK7 Synchronous Motor Series 1FK7103-2AF71-1RA0

Bevel Gear-Spur Gear Reducer K39-LHN90 Premium MLFB_SPANNUNG_13_3 Mounting Position M1-B Protection Method IP55 Surface Protection C1 For Normal Pollution Degree 7016 Smoke Gray Anschlusskasten-Lage 2A

16-pin preformed circular cable, unshielded, 16 pins, 4 m

Active drive coupled relays in an industrial housing with 2 normally open contacts / 1 normally closed contact, 24 V to 240 V AC/DC, SIL 2 / PL c, bolt-type terminal connections.

Customized Button Product Instantaneous Type Plastic Yellow 1NO 1NC Illuminated Flat Head Button 3SU11020AB301FA0ZY11

SOLO bevel gearbox K89-K4-(100) Installation position M6-A oil level sight glass Flange diameter 300 Surface protection C1 for normal environmental pollution 7016 Smoke gray

Circuit Breaker 2.5 A A Trip Unit 1.8...2.5 A, N Trip Unit 33 A, for motor protection, Class 10, screw connections, standard switching capacity, with lateral auxiliary switch 1 NO+1 NC

Siemens 3VT8 Series Molded Case Circuit Breakers and Accessories

reversing contactor assembly, AC-3e/AC-3, 80 A, 37 kW / 400 V, 3-pole, 110 V AC, 50/60 Hz, screw terminal, electrical and mechanical interlock, auxiliary contacts: 2 x 1 NO

Load feeder fuseless, Direct-on-line starting 400 V AC, Size S2 49...59 A 230 V AC, 50 Hz screw terminal for installation on standard mounting rail (also fulfills type of coordination 1) Type of coordination 2, Iq = 150 kA 1 NO+1 NC (contactor)

Customized button products

The circuit breaker VT160 has a standard switching capacity of N Icu = 35kA, 415/440 VAC 4-pole, with system protection. It is equipped with a thermal-magnetic tripping device, IR = 32A for overload protection, and II = 500A for short-circuit protection. It does not have an auxiliary tripping device or an auxiliary switch. The terminals are at the front of the plug-in section.

ET 200 PRO RSE ST Reversible Starter, Standard version, mechanical switch, electronic overload protection

Siemens 3LD92052C

Customized button products

SOLO bevel gearbox K109-K2-(132) check valve Installation position M1-B oil level sight window Rotation direction Right Surface protection C1 for normal environment Pollution class 5015 sky blue

Siemens Single Cable Assembly 4G0.75+2x0.5+4x0.2 C Connector SPEED-CONNECT M17 with Wire Ferrules Wired with IX Connector UL/CSA...