Industrial Control Products

WAGO 231-433/040-000 male header, 3-pole, THT, angled pins, 5mm spacing. Ensures secure and stable PCB connections.

Stackable 2-conductor PCB terminal block with commoning, 2.5 mm², 5 mm pin spacing, and CAGE CLAMP®.

WAGO 793-513 WMB marking card for marking cables and wires with horizontal thermal transfer method.

10-pole THR male header with 3.5mm pitch, 1.0 mm Ø solder pins, and clamping collar.

WAGO 756-1204/060-050 Ethernet cable, M12D angled plug, 4-pole, 5m length.

4-pole THt male header with 5.08mm pin spacing, threaded flange, and polyamide (PA66) insulation.

Sensor/Actuator cable with M12A socket and M8 plug, 3-pole, 2m length. Operating voltage: AC/DC 60V, current: 4A.

3-conductor through terminal block for DIN-rail mounting, rated 800 V, 24 A, with push-in CAGE CLAMP connection.

WAGO 756-5401/050-020 is a 5-pole sensor/actuator cable with M12A connectors, 2m long, ideal for industrial automation.

The WAGO 2016-7192 is an orange end/intermediate plate for 2016-71xx series terminal blocks, with a width of 1 mm and UL94 V0 flammability.

Isolated mounting carrier for DIN rail terminal blocks. Compatible with M4 x 8 mm busbar screws.

Stackable PCB terminal block with 4 mm² cross-section and 5 mm pin spacing, featuring CAGE CLAMP® technology.

4-conductor terminal strip with fixing flanges, 9-pole, for screw or similar mounting types.

WAGO 793-5487 WMB marking card for labeling 5mm wide terminal blocks. Snap-on type with horizontal marking.

WAGO 1-conductor male connector with CAGE CLAMP® technology, 2.5 mm² conductor size, and 7.62 mm pin spacing for reliable connections.

Step-down cover plate for 2-conductor 284-901 terminal blocks, 1 mm thick, orange.

The WAGO 750-842 is a 1st generation Ethernet controller, ideal for industrial automation with DIN rail mounting and CE approval.

WAGO 2721-108/037-000: 1-conductor female connector with push-in CAGE CLAMP, 2.5 mm², 5 mm pin spacing, 8 poles, and 100% mismating protection.

The WAGO 750-479 is a 2-channel analog input module with ±10 VDC differential input, suitable for DIN rail mounting in industrial automation systems.

WAGO 859-730 Optocoupler Module: 24V DC input, 3-30V DC output, 3A continuous current, compact 6mm width, and fast tool-free connections.