Industrial Control Products

5-pole PCB terminal block with 3.5 mm pin spacing, push-in CAGE CLAMP® connection, and 1.5 mm² wire size.

WAGO 870-104 is a 1-conductor/1-pin double deck receptacle terminal block for DIN-rail 35 x 15 and 35 x 7.5, featuring CAGE CLAMP® technology.

WAGO 2-channel analog input module for 4-20 mA signals, single-ended, 16-bit resolution, and 60 Hz filter.

Current signal conditioner with Modbus RTU, 24 VDC supply, and various current input signals.

Relay socket for 5 mm relays, 24 V AC/DC, yellow status indicator.

Self-adhesive marking strips, DIN A4 sheet, 3mm height, 182mm length, white color.

System cable for WAGO-I/O-SYSTEM 750 Series, 2m long, 0.14 mm² conductor cross-section.

The WAGO 862-2504 is a 4-conductor chassis-mount terminal strip without ground contact, suitable for 3 mm ø screws and nuts.

WAGO 793-4668 WMB marking card for vertical marking on terminal blocks, snap-on type, stretchable 4-4.2 mm.

WAGO 734-564 angled THT female header with 4 poles, 3.81mm pin spacing, and 100% mismating protection.

24-pole PCB terminal block with 2.5 mm² conductor size and 5/5.08 mm pin spacing. Uses PUSH WIRE® connection technology.

5-pole PCB terminal block with 7.5 mm pin spacing, CAGE CLAMP® technology, and operating lever for secure connections.

10-pole PCB terminal block with 2.5 mm² conductor size, PUSH WIRE® connection, and gray color.

WAGO 769-107/021-000: 7-pole, 1-conductor female connector with CAGE CLAMP®, 4 mm² cross-section, and 5 mm pin spacing.

Stackable 2-conductor PCB terminal block with PUSH WIRE® technology, 0.75 mm² cross-section, and 10/10.16 mm pin spacing.

WAGO 2002-1911/1000-542 Connector. Precision-engineered for reliable electrical connections. Tool-free installation.

4-channel digital input module with 24 VDC, 3 ms response, and 3-conductor connections. Suitable for sensors, switches, and encoders.

WAGO 770-2303 is a 3-pole snap-in socket with Cod. P and 4.00 mm² wire cross section, featuring protection against mismating.

Angled 1-conductor female connector with CAGE CLAMP® technology, 2.5 mm² conductor size, and 5 mm pin spacing.

Fail-safe 4-channel digital input module for industrial automation, 24V DC, IP20 rated, and compliant with PROFIsafe V2.0.