Industrial Control Products

Double-deck terminal block with CAGE CLAMP® technology, compatible with DIN-rail 35 x 15 and 35 x 7.5, featuring an additional jumper position on the lower level.

8-level same potential terminal block for 35 x 15 mounting rails, with internally commoned clamping units and 2.3 mm Ø test port.

The WAGO 750-491 is a standard analog input slice module designed for weighing and force measurement. It features a single analog input with 16-bit resolution, a conversion time of 500ms, and is protected to IP20 standards.

WAGO 750-438: 2-channel digital input module for NAMUR signals, intrinsically safe, suitable for hazardous areas.

5-pole straight plug for PCBs, rated 25A, 400V, with locking lever and UL approvals.

WAGO 770-864/011-000/071-000: 4-pole angled terminal block plug with female sockets, ideal for PCB connections.

Sensor/Actuator cable for industrial applications, featuring M8 connectors and 3 poles.

6-pole female plug with push-button and locking lever, for 12 AWG wires, part of the MCS system.

WAGO 282-326 separator plate, 2mm thick, gray. Ideal for 864.

The WAGO 750-425 is a 2-channel digital input module with 24VDC, NAMUR compatibility, and DIN Rail mounting.

Double-deck terminal block with 2 x 1N4007 diodes, fits DIN-rail 35 x 15 and 35 x 7.5, CAGE CLAMP® technology.

WAGO 282-439/011-000 insulated jumper for secure electrical connections, rated 30A, orange.

Separator plate designed for use with DIN rail terminal blocks, 2 mm thick, and gray in color.

Separator plate for DIN rail terminal blocks, 2 mm thick, light gray.

9-pole PCB terminal block with lever, 1.5 mm² wire size, and 7.5 mm pin spacing. Uses Push-in CAGE CLAMP® connection.

WAGO 210-719 operating tool with 2.5 x 0.4 mm blade and partially insulated shaft for electrical and industrial use.

WAGO 250-411 PCB terminal block with 11 poles, push-in CAGE CLAMP, and 0.5 mm² wire size for secure electrical connections.

Operating tool made of insulating material, suitable for 279 Series Front-Entry Terminal Blocks.

3-pole PCB terminal block with push-button actuation and 0.5 mm² conductor cross-section. Ideal for through-hole mounting.

4-position wire to board terminal block with push-button CAGE CLAMP®, 0.5 mm², through-hole mounting, 45° angle.