Industrial Control Products

WAGO 756-1104/060-065 PROFIBUS cable, M12B angled plug, 5-pole, 6.5m. Suitable for industrial fieldbus applications.

Insulated, 3-way orange jumper for switching lever. Part number 2007-8443. Ideal for rail mount terminal blocks.

WAGO 231-163/040-000 THT Male Header, 3-pole, 5mm pin spacing, straight 1.2x1.2mm solder pins with clamping collar.

Angled THT female header, 4-pole, 5 mm pin spacing, clamping collar, 0.6 x 1.0 mm solder pins.

4-conductor end terminal block for DIN rail mounting, without push-buttons, and with a fixing flange.

Reliable 2-conductor female connector with push-in CAGE CLAMP technology, ideal for PCB interconnect applications.

2-conductor female PCB connector strip with PUSH WIRE technology, suitable for 0.8 mm Ø wires and 3.5 mm pin spacing.

WAGO 260-210 4-conductor terminal strip for rail chassis, featuring fixing flanges and 1.5 mm² conductor size.

Angled 1-conductor female connector with CAGE CLAMP technology, 2.5 mm² conductor size, and snap-in mounting feet.

WAGO TOPJOB S 2-conductor terminal block with push-button, 10 mm², test port, and DIN-rail mounting.

WAGO WMB marking card, suitable for horizontal marking, snap-on type, and available in white color.

2-conductor through terminal block with 4 mm² conductor size, center marking, and CAGE CLAMP® technology for DIN-rail mounting.

WAGO 283-335 step-down cover plate, 1 mm thick, orange. For use with DIN rail terminal blocks.

The WAGO 283-329 is a 2mm thick, oversized, orange separator plate designed for use with DIN rail terminal blocks.

4-pole PCB terminal block with 1.5 mm² nominal cross section and push-in CAGE CLAMP connections.

2-conductor through terminal block for DIN-rail 35 x 15 and 35 x 7.5, with CAGE CLAMP® and 10 mm² cross-section.

WAGO 281-658 shield terminal block for secure connections. 4-conductor, 28-12 AWG, 6 mm wide.

WAGO 2202-6403 4-conductor feedthrough terminal block with push-buttons, DIN rail mount, 12-22 AWG.

The WAGO 282-338 is a 2 mm thick separator plate, light gray, designed for use with rail-mounted terminal blocks.

3-conductor through terminal block with push-button, suitable for Ex e II applications, DIN-rail 35 x 15 and 35 x 7.5.