Industrial Control Products

Space-saving 2-conductor terminal block with push-buttons, for grounding/earthing, DIN rail or surface mount.

Angled 3-pole PCB plug, Cod. A, for 16-22 AWG wires. Operating temperature: -35°C ~ 85°C.

WAGO 750-337/025-000 Fieldbus Coupler with CANopen, 64 connections/node, 24Vdc power, DIN-35 rail mount.

The WAGO 280-649 is a 2-conductor disconnect/test terminal block designed for DIN-rail mounting. It features touch-proof test sockets and is ROHS compliant.

WAGO TOPJOB S end plate, 1.5 mm thick, gray. Suitable for various industrial and building installations.

3-conductor through terminal block with CAGE CLAMP® for DIN-rail 35 x 15 and 35 x 7.5, 16 mm² conductor size.

WAGO 279-422 insulated jumper, yellow-green, for Series 279 rail-mounted terminal blocks. Ensures secure electrical connections.

WAGO 885-530 separator plate, 2mm thick, 157mm wide, gray. Organize and separate terminal blocks efficiently.

WAGO 793-622 WMB marking card for terminal blocks. White card with vertical black digit markings.

The WAGO 790-311 is a busbar carrier designed for DIN 35 rail, featuring a 140mm width, 45mm height, and an angled design.

This 13-pole PCB terminal block from WAGO features push-in CAGE CLAMP® technology, a 2.5 mm² conductor cross-section, and 5 mm pin spacing.

2-conductor PCB terminal block with 10 mm² cross-section, 7.5 mm pin spacing, and Push-in CAGE CLAMP connection for secure connections.

10-pole male terminal block plug with push-in CAGE CLAMP technology, rated for 10A and 160V.

WSB marking card for vertical marking. Snap-on type, white, 50 pieces per pack. Marker/Strip width: 5 mm.

1-conductor male connector with lever actuation, Push-in CAGE CLAMP®, 16 mm², 10.16 mm pin spacing, 6-pole, 100% protected against mismating, DIN-35 rail/panel mounting.

WAGO 832-1104/322-000: 1-conductor female connector with Push-in CAGE CLAMP®, 16 mm², 4-pole, and centered locking levers.

WAGO 734-604 strain relief housing ensures secure connections with 4 poles and 3.5 mm pin spacing.

WAGO 2092-1406/005-000 THT male header, 6-pole, 1.4 mm solder pins, 5 mm spacing, push-in CAGE CLAMP®.

WAGO 832-1103/306-000 is a 1-conductor female connector with Push-in CAGE CLAMP, 16 mm² conductor size, and DIN-35 rail mounting.

WSB marking card for vertical marking on 5mm terminal blocks. Snap-on type, white, 50 pieces per pack.