Industrial Control Products

WAGO 2-pin terminal block for pluggable modules, 10-pole, 2 jumper positions, orange separator plate, compatible with DIN-rail 35 x 15 and 35 x 7.5.

WAGO 870-834 4-conductor through terminal block for DIN-rail, Ex i applications, CAGE CLAMP® technology.

3-conductor feedthrough terminal block, gray, for DIN-rail 35 x 15 and 35 x 7.5, CAGE CLAMP® connection technology.

WAGO 790-190 U-shaped busbar, 63 mm x 60 mm, Cu 10 mm x 3 mm, suitable for 750 Series I/O modules.

2-conductor terminal block with push-button, snap-in mounting, and ROHS compliance. Rated for 24A.

The WAGO 260-211 is a 4-conductor terminal strip with 11 poles, featuring fixing flanges and suitable for screw or similar mounting types.

Loop-powered RTD temperature signal conditioner for Pt100, Pt200, Pt500, Pt1000 sensors with current and voltage output.

Stackable PCB terminal block with CAGE CLAMP® technology, 5/5.08 mm pin spacing, and commoning option.

The WAGO 857-800 JUMPFLEX signal conditioner is a configurable device for temperature measurement, supporting Pt100, Pt200, Pt500, and Pt1000 sensors. It features DIN rail mounting and spring terminal connections.

WAGO 231-2305/107-000 female connector with Push-in CAGE CLAMP, 5.08 mm pin spacing, and 5-pole design for reliable PCB connections.

WAGO 262-337 is a 4-conductor terminal block with a fixing flange, suitable for screw mounting. It features CAGE CLAMP® technology.

WAGO 750-8001 Basic Controller 100 with 2 x Ethernet for industrial automation, featuring 16 MB program memory and 32 MB data memory.

Insulation stop for terminal blocks, suitable for 0.75 - 1 mm² wires, available in strips of 5 pieces.

5-pole sensor/actuator cable with angled M12A socket and plug, 2m length, IP67 protection, suitable for industrial use.

WAGO 832-1206/334-000 male connector with push-in CAGE CLAMP, 16 mm², 6-pole, and strain relief plate.

WAGO 211-115 nozzles are 12mm long, halogen-free, and designed for use with specific WAGO terminal blocks.

The WAGO 264-902 Mini-WSB marking card is designed for horizontal marking with snap-on type and labeled L1, L2, L3, N, PE.

WAGO 260-252 is a 4-conductor terminal strip with snap-in mounting feet, featuring push-in termination for solid and stranded conductors.

Empty housing for WAGO rail-mounted terminal blocks. Ideal for DIN-rail mounting, gray color.

WAGO 756-3514/050-100 power cable with M12L angled plug, 5-pole, 10m. Suitable for industrial and system wiring applications.