Industrial Control Products

12-position wire to board terminal block with push-in CAGE CLAMP® connections, suitable for 16 AWG wires and 3.5 mm pin spacing.

6-pole female plug with 5 mm pitch, push-button connection, and 12 AWG max wire gauge. Part of WAGO's MCS system.

THR PCB terminal block with push-in CAGE CLAMP, AWG 24-18, 8mm pin spacing, 2-pole, in tape-and-reel packaging.

The WAGO TOPJOB®S jumper is a 2-way insulated connector designed for the 2001 series terminal blocks, ideal for various industrial and building installations.

3-position terminal block plug with female sockets, 7.5mm pin spacing, and CAGE CLAMP® connection technology for easy wiring.

3-conductor sensor terminal block with 2.5 mm² conductor size, colored entries, and CAGE CLAMP® technology.

12-position male terminal block plug with 2.5 mm² wire size, 7.62 mm pin spacing, and DIN-35 rail/panel mounting.

WAGO 750-630/000-013 SSI transmitter interface for industrial automation, 29 bits, 125 kHz.

System cable for WAGO-I/O-SYSTEM 750 Series, 1 m long, with 2x 8 digital inputs/outputs and 0.14 mm² conductor cross-section.

Stackable 2-conductor PCB terminal block with fuse mounting, 2.5 mm² wire size, and 5 mm pin spacing.

The WAGO 869-357 is a 2-conductor end terminal block designed for secure connections. It features a fixing flange, fine-stranded conductor compatibility, and a fire load rating of 0.076 MJ.

3-conductor ground terminal block with push-buttons, test port, and side/center marking. Mounts on DIN-rail 35 x 15 and 35 x 7.5.

Relay module with 230 VAC input, 2 changeover contacts, and 8 A continuous current. Ideal for industrial automation.

A 2-conductor ground terminal block designed for DIN-rail mounting, featuring 2.5 mm² wire size and CAGE CLAMP® technology.

WAGO 793-5518/000-002 WMB marking card for horizontal marking, snap-on type, and compatible with various terminal block series.

End and intermediate plate for WAGO terminal blocks, 2.5 mm thick, light gray.

Triple-deck PCB terminal block with 48 poles, 2.5 mm² wire cross section, and 5.08 mm pin spacing. Ideal for high-density PCB applications.

WAGO 722-835 THT female header, angled, 7.5mm pin spacing, 5-pole, fully protected against mismating.

The WAGO 279-482 is a 2-way, insulated comb-style jumper bar for reliable electrical connections.

5-pole picoMAX male header with 1.4 mm straight pins, 7.5 mm spacing, and clamping collar. Suitable for PCB interconnects.