Industrial Control Products

Specialty electronic module for interface applications, operating within 0 to +50°C and storage from -25 to +85°C.

The WAGO 262-135 is a 2-conductor terminal strip designed for Ex e II applications, featuring fixing flanges and a 5-pole configuration.

Filter module for field-side power supply surge protection, 24VDC, higher isolation, and extreme temperature range.

End and intermediate plate for Series 870 rail-mounted terminal blocks, 1 mm thick, orange.

WAGO 231-646/114-000 1-conductor male connector, ROHS compliant, for secure electrical connections.

WAGO 770-122/041-000 socket with strain relief housing, 2-pole, 4.00 mm². Ideal for secure connections.

WAGO 2000-1302 TOPJOB S 3-conductor feedthrough terminal block, 3.5 mm wide, orange, 800 V, 20 A, DIN rail mount.

System cable for Siemens S7-300, 8 analog current inputs, 2m long, 0.25mm² conductor.

WAGO 2022-2231 is a 1-conductor/1-pin double deck receptacle terminal block, ideal for DIN-rail applications.

WAGO 210-345 labels are designed for laser printers with a permanent adhesive, ideal for terminal block marking.

WAGO 231-644/129-000: 1-conductor male connector with CAGE CLAMP, 14-pole, 5.08 mm spacing, and snap-in flange.

PCB terminal block with push-in CAGE CLAMP and operating lever, 10-pole, 5mm pin spacing, suitable for AWG 24-12 wires.

3-pole THT male header with angled 1.2 x 1.2 mm solder pins, 100% protected against mismating, and preceding ground contact.

Triple-deck terminal block for DIN-rail, Ex e II compliant, with marker carrier.

Room Automation System Distribution Box, Type 3, for integrating various automation components.

The WAGO 2000-3291 is a gray, 0.7 mm thick end and intermediate plate for TOPJOB S terminal blocks, suitable for industrial and building applications.

Pre-assembled 2-pole connecting cable, Cod. E, Y-H(St)Hh 1x2x0.8, 1m long, green.

4-channel digital input module, 24 VDC, low-side switching, 3 ms response time, pluggable wiring interface.

Angled 1-conductor female plug with CAGE CLAMP technology, suitable for solid and ferruled conductors, and various mounting options.

8-pole through-panel terminal block with CAGE CLAMP®, suitable for plate thickness 1-4 mm and conductor size 4 mm².