Industrial Control Products

WAGO 750-550/000-200: 2-channel analog output module for automation. 0-10 VDC, 12-bit resolution, cage-clamp terminals.

4-conductor ground terminal block for DIN-rail mounting, featuring CAGE CLAMP® connection technology and suitable for wires up to 12 AWG.

2-conductor female PCB terminal block with 1.5 mm² wire size and 5 mm pin spacing.

WAGO 721-272/001-000 THT male header, 12 poles, 7.5 mm pin spacing, tin-plated, and 100% mismating protection.

The WAGO 2001-1408 is a 4-conductor shield terminal block designed for DIN-rail mounting. It features a Push-in CAGE CLAMP connection technology and is compatible with 35 x 15 and 35 x 7.5 DIN-rails.

12-pole THT male header with 1.0 x 1.0 mm solder pins, straight orientation, and 5.08 mm pin spacing.

Double-deck terminal block for DIN-rail 35, 2.5 mm² conductor size, ground conductor/through terminal block.

9-pole PCB terminal block with integrated push-buttons, 5mm pin spacing, and CAGE CLAMP® technology for reliable connections.

WAGO 2022-105/000-038 is a 1-conductor female connector with push-in CAGE CLAMP® technology, suitable for 4 mm² conductors and 5-pole applications.

WAGO 2-pole pre-assembled interconnecting cable, Cca, socket/plug, 8m, green, for WINSTA® KNX systems.

WAGO 794-5658 WMB marking card for terminal blocks. Snap-on type, white, marked with numbers 100103-187, 101-188, 102-189. Suitable for 5-5.2 mm wide terminal blocks.

WAGO 756-6401/030-015 is a 3-pole Sensor/Actuator cable with M12A socket and plug, suitable for industrial automation and control systems.

Programmable logic controller with 24VDC, multiple communication interfaces, and extended temperature range.

17-pole THT male header with 1.0 x 1.0 mm solder pins, straight orientation, and 5 mm pin spacing.

WAGO 714-102/000-047 is a 1-conductor female connector with a push-button, 1.5 mm² cross-sectional area, and 3.5 mm pin spacing.

The WAGO 249-224 is a splicing connector designed for secure and efficient electrical connections.

3-conductor fuse terminal block with pivoting fuse holder, LED indication, and push-button. For DIN-rail mounting, 30-65 V, 6.3 A.

4-conductor through terminal block with push-in connections, suitable for Ex e II applications and DIN-35 rail mounting.

2-channel digital output module, 24 V DC, 0.5 A, short-circuit protected, ideal for industrial automation.

Adjustable electronic circuit breaker for 24VDC systems, 1-channel, 1-8A current range, with signal contact and DIN rail mounting.