Industrial Control Products

4-conductor chassis-mount terminal strip with ground contact; PE-N-L1-L2-L3; 5-pole; for 3 mm ø screw and nut; 4 mm²; black

Triple-deck terminal block; 6-conductor through terminal block; N; without marker carrier; for Ex e II and Ex i applications; internal commoning; conductor entry with violet marking.

Snap-fit type end plate, 1 mm thick, orange.

9-pole THT male header with 1.2 x 1.2 mm solder pin, straight, pin spacing 7.5 mm, gray.

WAGO 736-658 double-deck PCB terminal block with 2.5 mm² pin spacing and 16 poles.

2-conductor through terminal block with push-button, 1 mm², with test port, suitable for Ex i applications, side and center marking.

WAGO 770-626 T-distribution connector 4-pole, black, 1 input, 2 outputs, 2 locking levers.

Triple-deck terminal block; Ground conductor/through/through terminal block; 2.5 mm²; PE/L/L; suitable for Ex e II applications; without marker carrier; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 2,50 mm²; gray.

CANopen/DeviceNet cable, angled, 5m, violet, RoHS compliant.

Suitable for sub-distribution boards equipped with residual current breakers (RCBs). Includes all required components for wiring supply.

WAGO's 770-1363 socket connector offers a reliable, 3-pole connection for various applications, ensuring fast and secure wiring.

System bus cable with angled M12B socket and plug, 5-pole, 3 meters long.

Double-deck terminal block with additional jumper position on lower level, suitable for DIN-rail 35 x 15 and 35 x 7.5.

Sensor/actuator cable with M8 socket, straight, 3-pole, 10m length.

2-conductor miniature through terminal block with operating slots and test port.

The WAGO 706 series system cable is designed for Siemens S7-300 applications, featuring 2 x 16 digital inputs and a 1 m length.

Triple-deck terminal block for DIN-rail 35 x 15 and 35 x 7.5, shield/through/through, 2.5 mm², with marker carrier, suitable for solid aluminum conductors up to 4 mm²/12 AWG with WAGO “Alu-Plus”.

A pre-assembled connecting cable with 5 poles, plug/open-ended design, and 10 mm pin spacing.

Enhance your terminal block management with the WAGO 209-692 marking card. Perfect for labeling and organizing your electrical connections.