Industrial Control Products

CANopen/DeviceNet cable; M12A plug; angled; 5-pole; Length: 5 m.

CANopen/DeviceNet cable, straight, 5 m

CANopen/DeviceNet cable; M12A plug; angled; 5-pole; Length: 10 m.

High-quality, durable CANopen-/DeviceNet cable for seamless system integration.

The WAGO 2116-1307 is a 3-conductor DIN rail terminal block designed for ground connections, featuring a lever and open tool slots for easy installation.

WAGO 745-156 PCB terminal block for reliable connections.

Push-in CAGE CLAMP® terminal block for reliable connections.

WAGO 255-507 PCB terminal block features push-button actuation, screwless wire termination, and 7-pole configuration.

1-conductor male connector; CAGE CLAMP; 2.5 mm²; Pin spacing 7.5 mm; 10-pole; 100% protected against mismating; 2,50 mm²; light gray.

PCB terminal block with screwdriver-actuated CAGE CLAMP® connection.

Male header; 3-pole; THT; 1.2 x 1.2 mm solder pin; angled; pin spacing 5 mm; gray

WAGO's 231-636 is a 1-conductor male connector with a 2.5 mm² cross-section and 5.08 mm pin spacing, featuring CAGE CLAMP technology for easy termination.

Female plug; 3-pole; mounting flange; 12 AWG max; pin spacing 5 mm; 1 conductor per pole; gray.

4-level terminal block for matrix patching with locking clips, one potential per level, with 2.3 mm Ø test port, marking: d-c-b-a--a-b-c-d.

4-level same potential terminal block; with locking clips; all clamping units internally commoned; with 2.3 mm Ø test port; for 35 x 15 mounting rail;

1-conductor female connector; CAGE CLAMP®; 2.5 mm²; Pin spacing 7.62 mm; 10-pole; Snap-in mounting feet; 2,50 mm²; orange (4044918375788)

4-level same potential terminal block; without locking clips; all clamping units internally commoned; with 2.3 mm Ø test port; marking: 0-1-2-3--3-2-1-0.

THT male header with 1.2 x 1.2 mm solder pin, straight orientation, and 7.62 mm pin spacing.

4-level terminal block for matrix patching; without locking clips; one potential per level; with 2.3 mm Ø test port; for 35 x 15 mounting rail; 1.5 mm²; ...

Snap-in mounting feet, 2.5 mm², Pin spacing 7.62 mm, 11-pole.