Industrial Control Products

2-conductor ground terminal block for DIN-rail, CAGE CLAMP®, green-yellow, up to 4 mm² wire size.

WAGO 750-495/040-002: 3-phase power measurement module with 690 VAC Rogowski coils for extreme environments.

Component terminal block with diode, suitable for DIN-rail 35 x 15 and 35 x 7.5, 4 mm² CAGE CLAMP.

End and intermediate plate; 1 mm thick; orange (4017332428590)

3-conductor through terminal block; 4 mm²; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®.

Linect T-connector; 5-pole; Cod. A; 1 input; 2 outputs; white.

Pre-assembled connecting cable with 5 poles, suitable for various industrial applications.

3-conductor sensor terminal block; LED (yellow); for PNP-(high-side) switching sensors; with pluggable signal level; 1 mm; Push-in CAGE CLAMP; 1,00 mm; gray.

10-pole, 2.5 mm², fixing hole 3.5 mm Ø.

End plate terminal block with snap-in mounting foot for rail chassis applications.

WAGO 250-313 is a 13-pole PCB terminal block with a push-button and 0.5 mm² cross-section. It features a 2.5 mm pin spacing and uses the Push-in CAGE CLAMP® connection method.

WAGO 783-321 busbar carrier, DIN 35 rail, 1.5 mm thick, blue. Perfect for installation terminal blocks.

Female plug; 13-pole; mounting flange with reinforcing strip; 12 AWG max; pin spacing 5 mm; 1 conductor per pole; gray.

Pre-assembled connecting cable; Cca; Plug/open-ended; 3-pole; Cod. P; H05Z1Z1-F 3G 2.5 mm²; 3 m; 2,50 mm².

PCB terminal block with push-button, 0.5 mm², 22-pole, and 2.5 mm pin spacing.

WAGO 250-307 PCB terminal block; push-button; 0.5 mm²; Pin spacing 2.5 mm; 7-pole; Push-in CAGE CLAMP®; gray.

Double-deck terminal block; 4-conductor through terminal block; L; internal commoning; conductor entry with violet marking; for DIN-rail 35 x 15 and 35 x ...

4-conductor chassis-mount terminal strip without ground contact, 4-pole, 4 mm², white.