Industrial Control Products

2-pole PCB terminal block with 12.5 mm pin spacing, 6 mm² cross-section, and push-in CAGE CLAMP® technology.

TOPJOB S ground terminal block with push-buttons, rail mount, 4-conductor, green-yellow, for DIN-35 rail.

8-pole PCB terminal block with 12.5 mm pin spacing, push-in CAGE CLAMP® technology, and up to 6 mm² wire size.

WAGO 2626-1360 PCB terminal block features push-in CAGE CLAMP technology, 10 poles, 6 mm² cross-section, and 12.5 mm pin spacing.

Pre-assembled 5-pole connecting cable, Cod. I, H05Z1Z1-F 5G 1.5 mm², 2 m, blue.

WAGO Sensor/Actuator cable with M12A socket and M8 plug, suitable for connecting sensors and actuators in industrial environments.

Vertical 2-position wire to board terminal block with 7.5mm pin spacing and push-in CAGE CLAMP connection.

WAGO 756-6501/030-003 is a 3-pole sensor/actuator cable with an M12A socket and M8 plug, 0.3m long.

WAGO 756-6501/030-030 is a 3-pole sensor/actuator cable with M12A socket and M8 plug, designed for industrial applications and RoHS compliant.

9-pole PCB terminal block for reliable connections, with 6 mm² conductor size and 7.5 mm pin spacing.

WAGO 756 series connectors offer reliable connections with IP67 protection, suitable for various industrial uses.

Reliable PCB terminal block with push-in CAGE CLAMP for efficient electrical connections.

2-conductor feedthrough terminal block with push-buttons, suitable for DIN rail mounting, 800 V, 32 A, 22-14 AWG wire range.

Sensor/Actuator cable for connecting sensors and actuators, featuring an M12A socket and an M8 plug, with a length of 0.5 meters.

WAGO 756-6501/040-020 M12 power cable with 4 poles, 2m length, and IP67 protection.

WAGO 756-6501/040-003 cable connects sensors and actuators with M12A socket and M8 plug, 4-pole, 0.3m long.

Durable and reliable WAGO sensor/actuator cable for various industrial uses.

WAGO 756-6501/040-005 sensor/actuator cable, M12A socket to M8 plug, 4-pole, 0.5m. Durable and resistant to chemicals and UV.

2-conductor through terminal block, 2.5 mm², for DIN-rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, suitable for Ex e II applications.

Angled feedthrough terminal block, 2-conductor, 6 mm wide, gray, suitable for Ex e II applications.