Industrial Control Products

Circuit breaker 3VA1 IEC frame 250 Interrupting rating class S Icu=36 kA @ 415 V 4-pole

Drawer Circuit Breaker with Guide Frame 3-pole

Contactor Specification: 14 poles, AC-3, 335kW, 400/380V (690V) (3NO+3NC), 3TC4417-4A

Drawer Circuit Breaker with Guide Frame 4-pole

Safety position switch, closing force 2600N, 5 start directions, 3X

Customized button products

Siemens S120 power line 6FX5002-5DF10-1DA0

Siemens SIMOTICS 2nd generation S-1FK7 synchronous motor series 1FK7061-4CF71-1CA1

SIMATIC S7-400 Label Tape Yellow Packaging Unit 10

PROFIBUS FC Process Cable, blue, explosion-proof application, shielded, 1000m

Siemens SIMOTICS 2nd Generation S-1FK7 Synchronous Motor Series 1FK7084-3BC71-1QA2

Signal cable pre-assembled type: 6FX5002-2DC36 DRIVE-CLiQ with 24 V M12 female/ RJ45 IP67 MOTION-CONNECT 500 Dmax=7.1 mm Length (m)=7

Bevel Gear-Spur Gear Reducer Motor K149-LHN160 Premium MLFB_SPANNUNG_13_3 Brake L260 Brake Manual Release Lockable Microswitch Ventilation Inspection Brake Manual Release Position 2 Installation Position M4-A Sealing Longer Service Life Oil Level Sight Window Drain Plug Magnetic Protection Type IP55 Surface Protection C2 For Low Environmental Pollution 5015 Sky Blue Winding Therm. Disconnection Parking Heater 230V Junction Box Location 3D

Siemens 3WL series frame circuit breakers and accessories

The circuit breaker VT160 has a standard switching capacity of N Icu = 35kA, 415/440 VAC 3-pole, with system protection provided by a thermal-magnetic trip unit. The rated current IR is 50A for overload protection, and the short-circuit protection is set at II = 500A. It does not have an auxiliary trip unit or an auxiliary switch, and it is installed fixed.

Siemens 3RT1926-1BB00

Circuit Breaker 3VA1 IEC Frame 160 Interrupting Rating Class M Icu=55 kA @ 415 V 3-pole, Motor Starter Protection TM120M, AM, In=63A Without Overload Protection Short Circuit Protection Ii=7...16 x In Screw Terminal Connections

Siemens 3UA62402W

Power cable, pre-assembled 4x1.5 for motor S-1FL2 SH45/65/90 (S200)

Contactor AC 50 Hz, 110 V AC3, 400 V, 75 A, 37 kW. Auxiliary contacts: 4 normally open contacts + 4 normally closed contacts. Specifications 3