Industrial Control Products

1-conductor female connector with CAGE CLAMP® technology, 4 mm² conductor cross-section, and 5 mm pin spacing.

WAGO 231-164/001-000/105-604 male header, 4 poles, 5mm pin spacing, straight, black. Suitable for PCB interconnects.

WAGO 221-2505 is a 5-way mounting carrier with strain relief, designed for inline splicing connectors with lever, suitable for screw mounting.

WAGO 2016-7111 TOPJOB S Series 1-conductor disconnect terminal block, 16mm², push-in termination for industrial use.

WAGO 756-3506/050-020 power cable features M12L angled connectors, 5-pole, and is 2 meters long. Suitable for industrial automation and IoT.

Angled THT female header with 19 poles, 5 mm pin spacing, and 0.6 x 1.0 mm solder pins.

WAGO 249-233 WCB Combi Marking System, white, for horizontal marking on terminal blocks. Snap-on type, non-stretchable.

WAGO 756-5402/040-020 is a 4-pole sensor/actuator cable with M12A socket and angled M12A plug, suitable for industrial automation.

The WAGO 249-239 is a terminal block from the 249 series, designed for reliable electrical connections.

WAGO 756-5311/060-100 is a 10m long, 5-pole sensor/actuator cable with an M12A straight plug, made of polyurethane (PUR).

The WAGO 750-538 is a 2-channel relay output module featuring potential-free contacts, intrinsically safe, and Ex i rated. It provides two digital outputs with capacities of 500mA at 100VAC or 1A at 30VDC.

Female MCS-MIDI connector with 3 poles, 5mm pitch, and push-in CAGE CLAMP® for secure connections.

The WSB marking card (209-778) by WAGO is designed for vertical marking. It comes in white, is non-stretchable, and features a snap-on type mounting.

WAGO 723-611 male connector for secure and reliable connections in electrical circuits.

Incremental encoder interface with RS-422, 32-bit data width, and single interpreter for industrial automation.

WAGO picoMAX 7.5 Male Flanged 5P THR Header with 1.4 mm solder pins, straight, and clamping collar.

WAGO 722-838 THT female header, angled, 8-pole, 7.5 mm pin spacing. Ideal for board-to-board and board-to-wire connections.

Insulated push-in type comb-style jumper bar from 1 to 9 poles, rated current 18A, light gray color.

Miniature WSB Quick Marking System for WAGO-I/O systems.

WAGO's 805 Series Terminal Strips provide internal commoning to meet requirements without routing the ground conductor over the board.