Industrial Control Products

5-pole pre-assembled interconnecting cable, Cod. A, H05Z1Z1-F 5G 2.5 mm², 8 m long.

2-channel electronic circuit breaker with 48 VDC input and adjustable current from 2 to 10 A.

4-conductor through terminal block with CAGE CLAMP® technology, suitable for DIN-rail mounting and compatible with copper and aluminum conductors.

The WAGO 2016-1307 is a TOPJOB S ground terminal block designed for rail mounting. It features 3 conductors, is 12 mm wide, and has a green-yellow color.

Pre-assembled interconnecting cable with socket/plug, 5-pole, Cod. A, H05Z1Z1-F 5G 2.5 mm², 5 m for reliable connections.

Pre-assembled 5-pole connecting cable with Cod. A coding, H05Z1Z1-F 5G 2.5 mm², 8m long, black. Supports rapid and correct installation.

Orange, single-deck 3-conductor through terminal block with CAGE CLAMP connections, suitable for DIN-rail 35 x 15 and 35 x 7.5.

Screwless end stop for 35mm DIN rail terminal blocks. Tool-free installation, secure fit, and cost-effective.

Multilevel installation terminal block with 2.5 mm² nominal cross section, Push-in CAGE CLAMP®, and gray color.

Plug-in current transformer for converting 2000 A to 1 A, suitable for DIN-35 rail mounting.

Split-core current transformer for measuring currents up to 200 A with a voltage output signal of 333 mV.

WAGO 713-1112/107-000 is a 1-conductor female connector, 2-row, with CAGE CLAMP®, 1.5 mm², and 24 poles.

WAGO 855-4209/060-003 split-core current transformer for accurate current measurement with 60 A primary rated current and 333 mV output.

WAGO 723-605/000-042 male connector, 1-conductor, CAGE CLAMP®, 2.5 mm², 7.5 mm pin spacing, 5-pole.

WAGO 784-604 is a 2-conductor through terminal block with 10 mm² cross-section, suitable for Ex i applications, and mounts on DIN-rail 35 x 15 and 35 x 7.5.

High-accuracy plug-in current transformer for energy measurement. Primary: 300A, Secondary: 5A, Rated Power: 5VA, Accuracy Class: 0.5.

4-conductor/2-pin double-deck terminal block with internal commoning and front-entry wiring, suitable for 35 mm DIN Rail mounting.

Angled THT male header with 1.2 x 1.2 mm solder pins, 4-pole, and preceding ground contact. 100% protected against mismating.

WAGO 260-254 terminal strip, 4-conductor, snap-in mounting, compatible with 0.6-1.2 mm plates.

High-quality 5-pole female plug with 1 conductor per pole, designed for reliable electrical connections in various industrial applications.