Industrial Control Products

WAGO 209-496 WSB marking card, snap-on type, white, marked with U4, V4, W4 labels, not stretchable.

WAGO 209-421 labels are designed for use with 5mm wide terminal blocks, ensuring clear identification.

Terminal block with varistor and end plate, direct DIN rail connection, 48 VDC, 0.08-2.5 mm² wire gauge range.

Double-deck terminal block with varistor and end plate, compatible with DIN-rail 35 x 15 and 35 x 7.5, using CAGE CLAMP®.

WAGO 714-146 THT male header, 16-pole, straight, 3.5 mm pin spacing, 0.8 x 0.8 mm solder pin. Ideal for PCB interconnect applications.

Plug-in current transformer for accurate current measurement. Primary: 50 A, Secondary: 1 A, Rated Power: 1.25 VA.

WAGO 855-301/200-501 plug-in current transformer, 200 A / 1 A, vibration- and shock-resistant.

Insulated 5-way jumper for WAGO 2002 series, ensuring reliable and efficient electrical connections.

Pre-assembled 3-pole interconnecting cable, Cod. A, H05Z1Z1-F 3G 1.5 mm2, 5m length, with mismating protection and variable coding.

The WAGO 770-936 is a 3-pole H-distribution connector with Cod. P coding, featuring 1 input and 2 outputs on one side, and 3 locking levers for secure connections.

Terminal block with suppressor diode for 48 VDC, direct DIN rail mounting, and ROHS compliant.

Double-deck terminal block with BZW06-B TVS diode for overvoltage protection, compatible with DIN-rail 35 x 15 and 35 x 7.5.

WAGO F300-2 flange plate, 295x95 mm, with 50 M12 cable grips. Ideal for industrial I/O systems.

The WAGO 753-415 is a 4-channel digital input module with a 24 V AC/DC supply voltage and a response time of 20 ms.

Double-deck terminal block with P6KE91C TVS diode for 60 VDC overvoltage protection, compatible with DIN rail 35 x 15 and 35 x 7.5.

WAGO 280-502/281-612 terminal block with varistor, 110 VDC, DIN-35 rail mount, and CAGE-CLAMP connections.

The WAGO 792-801 is a two-stage surge suppression module for 24 VDC signal technology, protecting two signal paths with a common surge arrester.

WAGO 2007-8807 TOPJOB S ground terminal block, 2-conductor, DIN-rail mount, green-yellow, with touch-proof test socket.

WAGO THR PCB terminal block, 2.5 mm², 3-pole, 5 mm pin spacing, CAGE CLAMP®, tape-and-reel packaging.

The WAGO 210-149 is a screw with an M 5 x 8 specification, designed for use with angled support brackets and other mounting applications.