Industrial Control Products

WAGO 770-215: 5-pole pluggable connector with Cod. A coding, 4 mm² / 12 AWG nominal cross section for secure and reliable connections.

WAGO 756-5202/030-023 is a 3-pole sensor/actuator cable with M8 socket and angled M8 plug, 2.3m long.

WAGO 289-426 interface module, 64 poles, DIN 41612 connector, vertical mount, 12-28 AWG.

8-pole through-panel PCB terminal strip with angled solder pins, 5.08mm spacing, and fixing flanges for flush mounting.

WAGO 790-116 shield clamping saddle for secure DIN rail mounting, compatible with 7-16 mm diameter conductors.

3-pole PCB terminal block with 5 mm pin spacing, CAGE CLAMP connection, and angled solder pins.

WAGO 756-3501/050-150 power cable, M12L socket, 5-pole, 15m, 63VDC, 16A, IP68, for industrial and automation applications.

WAGO 232-506/007-000 is a 6-pole double pin header with 5 mm pin spacing, designed for DIN-35 rail mounting.

Mount controllers, bus couplers, and I/O modules with the WAGO 850-819/002-005 flange plate. Dimensions: 295 mm x 95 mm, weight: 200g.

3-position terminal block header with male pins, shrouded, right-angled, and 100% protected against mismating.

WAGO 769-237 is a 1-conductor/1-pin ground carrier terminal block for DIN rail 35 x 15 and 35 x 7.5, featuring CAGE CLAMP® technology.

Relay module with 115 VAC input, 1 changeover contact, and red status indicator. Ideal for industrial automation.

Triple-deck PCB terminal block with 2.5 mm² cross-section, 5 mm pin spacing, and CAGE CLAMP® technology.

The WAGO 737-212 is a triple-deck PCB terminal block with 2.5 mm² nominal cross-section and 36 poles, featuring CAGE CLAMP® technology.

Self-adhesive marking strips for horizontal marking, 80 strips (1-12), white, DIN A4 sheet.

WAGO 756-3505/050-075 power cable, M12L socket and plug, straight, 5-pole, 7.5m. Suitable for industrial use.

The WAGO 258-5010 Roller is designed for use with Smart Printers and WMB-Inline Weidmüller, facilitating efficient marking processes.

Double-deck terminal block for DIN-rail 35 mm, suitable for Ex i applications with through/through configuration and additional jumper position.

WAGO 2-conductor fuse terminal block with pivoting fuse holder and blown fuse indicator for 5 x 20 mm fuses.

Green WMB marking card for terminal blocks 5-17.5 mm wide. Snap-on, made from Polyamide (PA66).