Industrial Control Products

Precision signal conditioner for thermocouples J and K, featuring cold junction compensation and wire break detection.

Angled 1-conductor female connector with CAGE CLAMP® technology, 4 mm² cross-section, and 5 mm pin spacing.

WAGO 722-242/031-000 THT female header, 12-pole, 5mm spacing, touch-proof, for board-to-board and board-to-wire connections.

1-conductor THT female connector with push-button and Push-in CAGE CLAMP®, 1.5 mm², 3.5 mm pin spacing, and 1.0 mm Ø solder pin.

WAGO 756-3515/050-100 power cable, M12L socket and plug, 5-pole, 63 VDC, 16 A, 10 m, TPU.

WAGO 756-3514/050-075 power cable, M12L angled plug, 5-pole, 7.5m, IP68, for use in cable chains and moving machine parts.

10-pole THT female connector with push-in CAGE CLAMP®. Secure and reliable wiring solution.

WAGO 862-505 4-conductor chassis mount terminal strip, 5-pole, without ground contact.

WAGO 721-604/114-000 male connector, 2.5 mm², 5 mm spacing, 4-pole, protected against mismating.

WAGO 721-604/114-042 male connector with CAGE CLAMP, 5mm pin spacing, and snap-in flange for secure connections.

Fail-safe 8-channel digital input module, 24 VDC, PROFIsafe V2.0 iPar certified. Ideal for industrial automation and safety applications.

4-channel digital input module for industrial networks, 24 VDC, 0.2 ms response time, IP20 protection.

8-channel analog input module for 0-20 mA, 4-20 mA, and 3.6-21 mA signals with 12-bit resolution and 10 ms conversion time.

Angled 1-conductor female connector with CAGE CLAMP technology, suitable for 2.5 mm² conductors and 7.5 mm pin spacing.

Insulation stop for WAGO terminal blocks, 0.25-0.5 mm², 5 pieces per strip, light gray.

WAGO 2059-322/998-403 SMD PCB terminal block with PUSH WIRE technology, rated 3A, 250V UL 1977, ideal for automated assembly.

WAGO 756-1202/060-020 Ethernet/PROFINET cable with M12D angled plug, 4-pole, 2m long. Suitable for industrial networking.

3-conductor ground terminal block; 10 mm²; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP.

High-density, stackable PCB terminal block designed for industrial applications.

Angled THT male header with 2 poles, 1.0 x 1.0 mm solder pins, and 5 mm pin spacing.