Siemens

IP20 AS-I Slave with screw terminals

AS-I Adapter IP68 T Branch Connector AS-I+24V DC Suitable for M12 Round Cables 1xM12 Connector

ASIsafe Compact Module K45F, IP67, digital, 2F-DE/2DA, 2 safety input channels category 1/2

The ASIsafe compact module K45F LS type 4 (light sensor) is powered by AS-I.

IO-Link module K20, digital, 4DI, IP67, 4x input ports

Starter Package for Modular Safety System 3RK3 Contents: Advanced Central Module MSS Connections: Screw Terminals Safety ES V1.0 Software - Premium, with USB PC Cable

The M3 screw terminal is suitable for the AS-I interface data decoupling DCM 1271.

AS-Interface Work Safety Circuit Board Module Standard IP00 F-2DI/1DO Lock

The ASIsafe compact module K45F LS type 2 (light sensor) is powered by AS-I.

The ASI safety module, IP00, digital 2F-DI + 4DI/4DO is used for FORTRESS's dual slave: 2 safety input channels, category 1/2, or 1 safety input channel, category 3/4 (Category: Safety Category in compliance with EN 954-1), and 4 standard input channels for internal IN-DATA, serial bus, and 4 standard output channels for OPCUA. Note: The term "OPCUA" is assumed to be correct as it is a common protocol name, but if it should be "O

IP20 AS-I Slave with spring terminals

The AS-i compact module K45 digital A/B slave, 2DI/2DQ, IP67, with 2 inputs up to a maximum of 200 mA and 2 outputs up to 2A at 24V DC, with a maximum of 3A for all outputs. Specifically designed without a watchdog. Includes 4 M12 connectors and an installation plate. The 3RK1901-2EA00 or 3RK1901-2DA00 must be purchased separately.

Compact Module AS-i K60 Digital 4DI/4DQ, IP67 4 inputs up to 200 mA, 4 outputs with a maximum of 1 A, 24 V DC, 8 M12 standard connectors Special wiring by Studer Company Mounting plate 3RK1901-0CA00 to be ordered separately

AS-i module, 4 E/4 A with screw-type terminals, 4x1 inputs, Namur, 4x outputs at 45 mA, 24 V DC output power via AS-i cable for TUCHENHAGEN

IO-Link module K20, digital, 8DI, IP67, 8-channel input

ASIsafe Module K60F, with two safety input terminals 2FDI and two standard output terminals 2DO.

5-pole terminal blocks are used for the AS-i interface master CM 1243-2 and AS-i interface data.

AS-i module, 4 E/4 A with screw-type terminals, 4x1 inputs, PNP, 4x outputs at 45 mA, 24 V DC output power via AS-i cable for TUCHENHAGEN

Compact AS-i module K45 Digital 4DI, IP67, A/B slave with 4 input ports up to a maximum of 200 mA, 4x M12 standard connectors. Special wiring by Studer. Mounting plate 3RK1901-2EA00 or 3RK1901-2DA00 to be ordered separately.