Industrial Control Products

Feedthrough PCB terminal strip with push-button actuated CAGE CLAMP®, 2-pole, 5.08 mm pin spacing.

WAGO 793-496 WMB marking card for labeling terminal blocks. White, snap-on, 5 mm width, horizontal marking.

WAGO WMB marking card 793-502/000-007 for horizontal marking. Snap-on, gray, marked 1-10.

WAGO WMB marking card for labeling terminals. Marked 1-10, yellow, snap-on, horizontal, ROHS compliant.

WAGO F200-2 flange plate, 195x95 mm, with 32 M12 cable grips. Ideal for industrial I/O applications.

WAGO 209-579 WSB Quick Marker Horizontal Pen, white, 100 pieces. Snap-on type, not stretchable for easy marking.

2-conductor through terminal block with 1.5 mm² cross-section, suitable for Ex e II applications, and compatible with DIN-rail 35 x 15 and 35 x 7.5.

WAGO 231-769/001-000 THT male header with 9 poles, 7.62 mm pin spacing, straight pins, and orange color. RoHS compliant.

WAGO 232-769 terminal block header, 9-position, female sockets, 0.300\

WAGO 2-conductor female connector with Push-in CAGE CLAMP®, 2.5 mm², 7.5 mm pin spacing, and lateral locking levers for secure connections.

2-conductor disconnect/test terminal block with pivoting knife disconnect and test port, for DIN-rail 35 x 15 and 35 x 7.5.

2-conductor terminal block with 1N4007 diode, for DIN-rail 35 x 15 and 35 x 7.5, using CAGE CLAMP® technology.

The WAGO 793-924 WMB marking card is designed for vertical marking, featuring a snap-on type and white background with black digits, marked from 2101 to 2200.

Double-deck terminal block with 1N4007 diode, for DIN-rail 35 x 15 and 35 x 7.5, using CAGE CLAMP®.

WAGO 2009-113/000-024 Terminal Block provides reliable, maintenance-free electrical connections with CAGE CLAMP® technology.

WAGO 793-482 WMB marking card for labeling terminal blocks with horizontal marking. Compatible with widths 5-17.5 mm.

Angled 3-pole socket for PCBs, suitable for general mains applications. Rated 250V, 16A, with high mating cycles and robust design.

Single-deck terminal block with 1N4007 diode, 2 jumper positions, and CAGE CLAMP connections. Suitable for DIN-rail 35 x 15 and 35 x 7.5.

The WAGO 2857-534 is a configurable JUMPFLEX signal conditioner with a TC threshold value switch and picoMAX® connector, suitable for various industrial applications.

Angled 2-pole socket for PCBs, Cod. A, 0.25 - 1.5 mm² wire range, 250 V, 16 A.