Industrial Control Products

Relay module with 24 VDC input, 1 make contact, 16 A continuous current, and red status indicator. Ideal for lamp loads.

The WAGO 286-368 is a relay module with a 24 VDC nominal input voltage, featuring 1 break contact and a limiting continuous current of 5 A.

Optocoupler module for high-side switching with 230 VAC input and 20-30 VDC output, 0.5 A continuous current, and red status indicator.

WAGO 2636-1358 PCB terminal block, 8-pole, 15 mm pin spacing, suitable for wires AWG 18-4, with push-in CAGE CLAMP connection.

Single-phase switched-mode power supply with 12 VDC output voltage and 7 A output current, featuring a DC OK signal.

WAGO 288-824 component module with 10 mF capacitor, 24 VDC nominal voltage, and gray color.

WAGO 286-516 relay module, 230VAC, 2 DPDT contacts. Suitable for automation, with red status indicator and 15mm module width.

The WAGO 787-880 is a capacitive buffer module designed for 24 VDC systems, providing 10 A of output current for stable power supply in industrial settings.

1-phase switched-mode power supply, 22 VDC output, 1 A current. Ideal for industrial applications.

9-pole THT male header, 7.5 mm pin spacing, right angle, shrouded (4 side), for reliable PCB connections.

3-pole snap-in plug with Cod. P coding, direct ground contact, and IP20 protection. Suitable for 4.00 mm² conductors, rated for 250V and 25A.

Compact DC/DC converter with 48 VDC input and 24 VDC output, suitable for various industrial applications.

The WAGO 857-1494 is a 2-port optocoupler module with a nominal input voltage of 24 VDC and an output voltage range of 9-60 VDC, suitable for industrial automation applications.

The WAGO 787-885 redundancy module provides reliable 24 VDC power supply with 20 A current rating, ideal for industrial applications.

WAGO 243-747: 4-conductor female plug PUSH WIRE® connector for AWG 22-18 solid conductors, 5.75 mm pin spacing, and 7-pole assembly.

Self-adhesive marking strips for terminal strips, pre-printed with PE, N, L1, L2, L3 labels.

20-pole male header for through-hole mounting, with 1.0 x 1.0 mm solder pins and 5 mm pin spacing.

WAGO 885-406 2-pole jumper for rail-mounted terminal blocks. Unplated, silver-colored. Ideal for secure electrical connections.

WAGO 283-328 end and intermediate plate, 2.5 mm thick, orange. Suitable for various terminal block configurations.

WAGO 2006-1691 TOPJOB S End and Intermediate Plate, 1 mm thick, for terminal block applications.